ORBanshee Posted July 15, 2019 Report Share Posted July 15, 2019 So this is my first banshee, it has the older style pro circuit platinum pipes with the old style 304 silencers, replacing my rubbers where the pipe connects to the silencers because one side was dripping oil on my filters, that same side the silencer has some stuff on it up there(picture attached) and if I look inside the silencer the screen is broken and just plain trashed, I'm assuming I need to repack my silencers? Where can I find that screen like piece? Thanks guys Sent from my Pixel 3 using Tapatalk Quote Link to comment Share on other sites More sharing options...
SKEETER Posted July 15, 2019 Report Share Posted July 15, 2019 If you can, get the old piece out, measure length and diameter. Report back. Quote Link to comment Share on other sites More sharing options...
ORBanshee Posted July 15, 2019 Author Report Share Posted July 15, 2019 Probably be about 3 weeks before I get the chance, leaving for dunefest at the beginning of next week and today is basically my only work day on it because I'm swamped at actual work so that I can get the week of dunefest offSent from my Pixel 3 using Tapatalk Quote Link to comment Share on other sites More sharing options...
SKEETER Posted July 15, 2019 Report Share Posted July 15, 2019 Run it then. Wont be any louder than rest of the fellers at windy bay Quote Link to comment Share on other sites More sharing options...
97Screamer Posted July 15, 2019 Report Share Posted July 15, 2019 Pro circuit sells the cores, just give them a call. I'd wait until you take it apart just in case you need anything else while you're in there. Quote Link to comment Share on other sites More sharing options...
ORBanshee Posted July 15, 2019 Author Report Share Posted July 15, 2019 Good to know, thanks screamer, wasn't sure if they would have them since it's the older style, I think I remember reading somewhere that fmf packing is the best Stuff to use is that right?Sent from my Pixel 3 using Tapatalk Quote Link to comment Share on other sites More sharing options...
97Screamer Posted July 15, 2019 Report Share Posted July 15, 2019 I don't know about the best packing material. I use the cheapest they sell on Rocky Mountain ATV, I think its Lexx brand. Quote Link to comment Share on other sites More sharing options...
SKEETER Posted July 15, 2019 Report Share Posted July 15, 2019 Most guys I know use insulation you buy at home depot . Quote Link to comment Share on other sites More sharing options...
kawa110 Posted July 15, 2019 Report Share Posted July 15, 2019 Roxul Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
camp0429 Posted July 15, 2019 Report Share Posted July 15, 2019 Steel wool pot/pan scrubbers makes a good packing also Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted July 18, 2019 Report Share Posted July 18, 2019 I repacked my shearers with the fmf long lasting material (shredded pillowy stuff) i swear it made mine quieter, maybe it was placebo. but it took me a while to cram the stuff in there. its a tight fit Quote Link to comment Share on other sites More sharing options...
SKEETER Posted July 18, 2019 Report Share Posted July 18, 2019 Highly doubt that ^^^ loose as a goose Quote Link to comment Share on other sites More sharing options...
97Screamer Posted July 18, 2019 Report Share Posted July 18, 2019 4 hours ago, Ayesully810 said: I repacked my shearers with the fmf long lasting material (shredded pillowy stuff) i swear it made mine quieter, maybe it was placebo. but it took me a while to cram the stuff in there. its a tight fit More quite than it was when it was blown out or more quite than using other packing material? Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted July 18, 2019 Report Share Posted July 18, 2019 14 hours ago, 97Screamer said: More quite than it was when it was blown out or more quite than using other packing material? more quiet than regular packing material, id have to do a true DB test though, like i said perhaps placebo, but seems like it 1 Quote Link to comment Share on other sites More sharing options...
SD1026 Posted May 4, 2020 Report Share Posted May 4, 2020 On 7/15/2019 at 2:01 PM, ORBanshee said: So this is my first banshee, it has the older style pro circuit platinum pipes with the old style 304 silencers, replacing my rubbers where the pipe connects to the silencers because one side was dripping oil on my filters, that same side the silencer has some stuff on it up there(picture attached) and if I look inside the silencer the screen is broken and just plain trashed, I'm assuming I need to repack my silencers? Where can I find that screen like piece? Thanks guys Sent from my Pixel 3 using Tapatalk How did you make out with the repair. I’m experiencing the same issue Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.