Blueshee98 Posted June 17, 2019 Report Share Posted June 17, 2019 Hey guys just had quick question the mid range on my shee sputters pretty bad especially when hot the needle clip was on the 2nd to the top and I moved it to the first but still sputters a little what should I do? Quote Link to comment Share on other sites More sharing options...
christoph.tamz Posted June 19, 2019 Report Share Posted June 19, 2019 Jetting my dude. Drop the main jet and plug check to confirm. I.E. 160 main should now be a 155 or 150 or whatever it takes. Sent from my SM-N920V using Tapatalk Quote Link to comment Share on other sites More sharing options...
AKheathen Posted June 21, 2019 Report Share Posted June 21, 2019 jetting is more about throttle range than rpm range. sputter means rich. Quote Link to comment Share on other sites More sharing options...
Blueshee98 Posted June 30, 2019 Author Report Share Posted June 30, 2019 I have 280 mains in it now at 5000 elevation tried dropping them to 270 and 260 doesn’t change anything starting to think jetting isn’t the issue Quote Link to comment Share on other sites More sharing options...
Blueshee98 Posted July 1, 2019 Author Report Share Posted July 1, 2019 Anybody got ideas? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.