Steven66 Posted June 2, 2019 Report Share Posted June 2, 2019 Looking to put together a new top end for my bike to hold me out while I piece together my ground-up 4 mil. I currently have a set of big bore drag ported jugs with stock carbs, and T5’s. I’m interested in sending some stock jugs to redline and getting their playport package along with a set of SLP pipes which I will reuse for the 4 mil. Being that I cannot find a good set of virgin cylinders locally, where can I find a genuine set online for a good price? I know a lot of the “genuine top end replacement cylinders” on eBay are Chinese copies and not as good quality so I need help finding which ones are worth using. Quote Link to comment Share on other sites More sharing options...
SKEETER Posted June 2, 2019 Report Share Posted June 2, 2019 If your having cam do the porting, call and see if hes got some already. Quote Link to comment Share on other sites More sharing options...
registered user Posted June 3, 2019 Report Share Posted June 3, 2019 theres usually some factory jugs on ebay. or check craigslist. the china jugs arent the best qaulity but if your porting them anyways, they would be fine. the main problem i seen with them is the sleeve didnt match well with the casting but if you port them it would all get matched up ,so none of that would be a big deal Quote Link to comment Share on other sites More sharing options...
Steven66 Posted June 3, 2019 Author Report Share Posted June 3, 2019 12 hours ago, registered user said: theres usually some factory jugs on ebay. or check craigslist. the china jugs arent the best qaulity but if your porting them anyways, they would be fine. the main problem i seen with them is the sleeve didnt match well with the casting but if you port them it would all get matched up ,so none of that would be a big deal Ah, so there’s usually no issues with the metal quality of the sleeve or water jackets? Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted June 4, 2019 Report Share Posted June 4, 2019 HP2000 probably has some, same in insta that he had a set for sale for not cheap though, they were brand new out the box. Quote Link to comment Share on other sites More sharing options...
registered user Posted June 4, 2019 Report Share Posted June 4, 2019 12 hours ago, Steven66 said: Ah, so there’s usually no issues with the metal quality of the sleeve or water jackets? for a cheap alternative they look fine to me. the main reason i wouldnt normally recomend using them is because they likely need the port windows and casting matched up better. this would cost extra on top of the cylinder price. at that point you might be able to find a decent set of factory jugs. just call around and weigh your options Quote Link to comment Share on other sites More sharing options...
lucyjohn987 Posted July 11, 2019 Report Share Posted July 11, 2019 Have you tried to find it on Reecoupons.com? I purchased my one from there, I also found it on Ebay but its lil bit expensive there, and same thing same stuff I found on reecoupons half of eBay price, you also need to check there. Quote Link to comment Share on other sites More sharing options...
PaymentPlan Posted July 11, 2019 Report Share Posted July 11, 2019 I have a set of OEM virgin cylinders I would part with if your interested. Stock bore, unported. PM me if so. Sent from my SM-G950U using Tapatalk Quote Link to comment Share on other sites More sharing options...
Toybreaker Posted August 30, 2019 Report Share Posted August 30, 2019 I just scored a set on craigslist 64.75mm for $50 un ported look around they are out there Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.