2strokenojoke Posted May 9, 2019 Report Posted May 9, 2019 Need help jetting my 04 banshee 34mm carbs. Set up is 19cc domes cool heads, 66mm pistons,stock cylinders dune port, stock crank, timing on plus 4, vforce4 reeds aluminum intake, again 34mm flat side carbs and I'm at sea level any help please?? Quote
Ayesully810 Posted May 9, 2019 Report Posted May 9, 2019 what is it doing? is it running poorly ? or is this a first start up what jets does it have currently Quote
2strokenojoke Posted May 9, 2019 Author Report Posted May 9, 2019 I'll have to check to be sure tomorrow really jus trying to see what's the best jet chart for that setup running on t6 exhaust Quote
2strokenojoke Posted May 10, 2019 Author Report Posted May 10, 2019 23 hours ago, Ayesully810 said: what is it doing? is it running poorly ? or is this a first start up what jets does it have currently Update to your question I've ran the heat cycles 3 full cycles its running lazy and sluggish at take off. I'm running 175 mains and 45 pilots any suggestions Quote
Surfrjag Posted May 10, 2019 Report Posted May 10, 2019 lazy in throttle response or at wot? main is likely way to big try a 155 main 1 Quote
2strokenojoke Posted May 10, 2019 Author Report Posted May 10, 2019 Mostly when trying to lunch Quote
Ayesully810 Posted May 10, 2019 Report Posted May 10, 2019 19 hours ago, 2strokenojoke said: Mostly when trying to lunch where is your needle clip at? does it hesitate to make power? like sputtering before it starts making power? and yes main seems big but if it revs right now at wot id address the sluggishness, Quote
Keno Posted May 10, 2019 Report Posted May 10, 2019 175 seems pretty large. When i had 34PJ s on my 421 I was around 160. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.