rodgco Posted April 15, 2019 Report Posted April 15, 2019 Can’t seem to nail the mid range for jetting. Currently running 4mil with dune/trail port. 19cc domes and +4 timing with original rocket pipes running keihen 35’s. so far I have it set at 162 main and 68 pilot and clip in middle. I do run 50/50 pump/race I know race is harder to tell on plugs but besides that plugs have been showing a perfect colour. And elevation sea level. 1 Quote
Ayesully810 Posted April 15, 2019 Report Posted April 15, 2019 i would try dropping the 68 pilot to a 48 or 50 pilot, should clear things up Quote
SKEETER Posted April 15, 2019 Report Posted April 15, 2019 Before changing anything, what's it doing? Quote
375hp banshees Posted April 16, 2019 Report Posted April 16, 2019 ^^ You'll be Captain, before you know it Quote
Ayesully810 Posted April 16, 2019 Report Posted April 16, 2019 20 minutes ago, 375hp banshees said: ^^ You'll be Captain, before you know it dont give him false hope Quote
Canadianshee Posted April 16, 2019 Report Posted April 16, 2019 dont give him false hopeIs that not today's trend?Sent from my LG-H873 using Tapatalk Quote
SKEETER Posted April 16, 2019 Report Posted April 16, 2019 1 hour ago, Ayesully810 said: dont give him false hope If you're captain now, I'm a kernel Quote
rodgco Posted April 16, 2019 Author Report Posted April 16, 2019 Sorry forgot to say what’s happening. It feels like it’s boggy or no power and as soon as I give it more throttle it snaps into power band and she takes off. Take off seems good but when I have to back down and get on it again it’s stuck in that mid range and won’t power up unless I really give it throttle. Quote
Ayesully810 Posted April 16, 2019 Report Posted April 16, 2019 (edited) 10 hours ago, SKEETER said: If you're captain now, I'm a kernel colonel** , unless you mean a kernel from a bag of orville OP drop your pilot id say. 68 pilot is very huge. try 50 Edited April 16, 2019 by Ayesully810 Quote
gusto Posted April 18, 2019 Report Posted April 18, 2019 On 4/16/2019 at 12:53 AM, rodgco said: Sorry forgot to say what’s happening. It feels like it’s boggy or no power and as soon as I give it more throttle it snaps into power band and she takes off. Take off seems good but when I have to back down and get on it again it’s stuck in that mid range and won’t power up unless I really give it throttle. Move the needle clip and report back Quote
sk272013 Posted June 4, 2019 Report Posted June 4, 2019 highly doubt ill get a reply.. but I got a 4mil 65.50 bore, porting, fmf full exhaust, 2-1 SINGLE carb, 19cc domes, 795 pistons. where should I start on my jetting?? im very new to this fourm Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.