Wakebord101 Posted March 13, 2019 Report Share Posted March 13, 2019 (edited) No spark help I picked up a 89 j arm and I have no spark what so ever new coil bypassed key switch and still nothing what do I do now ?? I’m new to banshees but I work on bike and cars so I’m very mechanically inclined Please help lol Edited March 13, 2019 by Wakebord101 Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted March 13, 2019 Report Share Posted March 13, 2019 (edited) get an ohm meter and ohm the stator, red to green and white green to white red. ohm primary and secondary leads on coil and caps, caps should be 5k ohm. if all checks out then most likely cdi, try and find working parts to swap with if you have a buddy with a banshee. check harness for boo boos and sure primary lead wires are clamped on tight! i made that mistake before. Edited March 13, 2019 by Ayesully810 Quote Link to comment Share on other sites More sharing options...
Banshee802 Posted March 13, 2019 Report Share Posted March 13, 2019 This guy said it. Had my fair share of wiring troubles too. Get a wiring diagram and break it into sections. Start at stator first and work your way out. Best of luckSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
mercury65 Posted March 15, 2019 Report Share Posted March 15, 2019 I would look to see if a wire has come off the generator but you will need to remove the stator. but as Ayesyully said you can check it with a ohm meter without removing it. that happen to me on a weekend ride lucky I had my tool to remove stator. funny thing is the guy camping next to us had it happen on his yz 250 and told me to check it and bam that was it. quick and easy fix thanks to my fellow rider just glad I had my meter and tool on me. Quote Link to comment Share on other sites More sharing options...
Wakebord101 Posted March 15, 2019 Author Report Share Posted March 15, 2019 Thank you for all the comments I checked the wire harness today and I did not see any bad wires or cut but they r spliced together everywhere so I ordered a harness and I’m going to test the stator tomorrow and i will let y’all no tomorrow and go from there thank y’all very much Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.