Betojrz80 Posted February 23, 2019 Report Share Posted February 23, 2019 So my buddy bought a j arm banshee that came with some Vito’s pipes. He can’t get the bike to run just right, it keeps boging out. Since he bought the bike he got a dune/ drag port job and the timing done to +6. The guying doing the work says the bike runs like crap because of the pipes. What do u guys think of these pipes and could the guy be right? Thanks for any info Quote Link to comment Share on other sites More sharing options...
SKEETER Posted February 23, 2019 Report Share Posted February 23, 2019 Those vitos pipes are actually pretty decent, who's the guy doing the porting / engine work? Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted February 23, 2019 Report Share Posted February 23, 2019 those are great pipes. what are all the mods? could be a jetting issue. and who did the porting Quote Link to comment Share on other sites More sharing options...
Betojrz80 Posted February 23, 2019 Author Report Share Posted February 23, 2019 (edited) From what he tells me the bike has 64.5 pistons, 19cc domes,35mm carbs that were milled to 38mm 155main,55 pilot eek needle and a hot rod stock sized crank Edited February 23, 2019 by Betojrz80 Quote Link to comment Share on other sites More sharing options...
SKEETER Posted February 23, 2019 Report Share Posted February 23, 2019 Those pipes arent the issue... Quote Link to comment Share on other sites More sharing options...
jeremyshee01 Posted February 24, 2019 Report Share Posted February 24, 2019 What do u mean "runs like crap"? Quote Link to comment Share on other sites More sharing options...
Betojrz80 Posted February 25, 2019 Author Report Share Posted February 25, 2019 It takes off in first fine every gear after that it bogs out. We just found out the Stator is bad. The guy who did some of the build says that could be the problem. Quote Link to comment Share on other sites More sharing options...
SKEETER Posted February 25, 2019 Report Share Posted February 25, 2019 Have you tested it with meter? Quote Link to comment Share on other sites More sharing options...
Betojrz80 Posted February 25, 2019 Author Report Share Posted February 25, 2019 Ya, it got tested and it’s bad. Would that make the bike run like crap? Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted February 25, 2019 Report Share Posted February 25, 2019 Stator could certainly cause those issues. It’s definitely not those pipes. The Vito’s pipes should be happy in an RPM range between the CPI’s and Shearers. They are not the issue. Quote Link to comment Share on other sites More sharing options...
SKEETER Posted February 25, 2019 Report Share Posted February 25, 2019 Stator issues definately worse under a load. Replace with good OEM stator, and see how it is. Quote Link to comment Share on other sites More sharing options...
Betojrz80 Posted February 25, 2019 Author Report Share Posted February 25, 2019 A oem stator is what we bought. Let’s hope that’s the problem Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.