Greg15767 Posted February 17, 2019 Report Share Posted February 17, 2019 Hi guys. Installing a new electrosprts stator which for some reason is thicker/wider than the 1 I took off, and when I go to put the flywheel back on and torque the fly wheel to the 59ft lbs, it seems that the fly wheel is tight against the stator and will not turn over. Please help!! Banshee is supposedly a 1999 Quote Link to comment Share on other sites More sharing options...
SKEETER Posted February 17, 2019 Report Share Posted February 17, 2019 I'd be willing to bet if you replaced that pos aftermarket stator with a good OEM unit, your issue would be gone.. Quote Link to comment Share on other sites More sharing options...
97Screamer Posted February 17, 2019 Report Share Posted February 17, 2019 I agree with getting OEM electronics. In any event, is it possible your flywheel is bent from being improperly pulled such that it is convex and causing the rubbing? Quote Link to comment Share on other sites More sharing options...
Greg15767 Posted February 18, 2019 Author Report Share Posted February 18, 2019 17 hours ago, 97Screamer said: I agree with getting OEM electronics. In any event, is it possible your flywheel is bent from being improperly pulled such that it is convex and causing the rubbing? No. Used and actual nut style fly wheel puller. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.