Coolant out of cylinder head?

[Papalala]

So my friends banshee runs perfect and has no issues whatsoever but the only problem is that when he turns it off we hear and see coolant coming out of his cylinder head and boiling. He has had this banshee for months and it didnt have this issue, he uses regular water for coolant if that helps. Could it be a hole in the head? If so what are the repairs and how much would it approximately cost? Thanks!

 

 

Sent from my iPhone using Tapatalk

[Ayesully810]

where is it coming from specifically 

[Papalala]

where is it coming from specifically 

I cant quite remmember but I think its on the middle closer to the front of the banshee.


Sent from my iPhone using Tapatalk

[JUSTWANNARACE]

Stock head or billet head?

If it a billet head pull it off and check the orings. When reinstalling use copper washers and acorn nuts, put a little 1211, 1184 or yamabond in the acorn nut before you put them on. 

[Papalala]

Stock head or billet head?
If it a billet head pull it off and check the orings. When reinstalling use copper washers and acorn nuts, put a little 1211, 1184 or yamabond in the acorn nut before you put them on. 

Stock head


Sent from my iPhone using Tapatalk

[JUSTWANNARACE]

Most likely needs a new head gasket then. I would assume its seeping from the head studs

Edited November 29, 2018 by JUSTWANNARACE

[n2otoofast4u]

Here's reality

1- Get some Splinter looking Cali to OR transplant fuck involved.

2- Get a janitor from Canada involved

3- Change the head gasket, but block shit off to redirect water that's been making the same path without issue for 30 fkn years.

4- Report results

[JTmachining]

Here's reality

1- Get some Splinter looking Cali to OR transplant fuck involved.

2- Get a janitor from Canada involved

3- Change the head gasket, but block shit off to redirect water that's been making the same path without issue for 30 fkn years.

4- Report results

O u mofo

[Papalala]

Here's reality

1- Get some Splinter looking Cali to OR transplant fuck involved.

2- Get a janitor from Canada involved

3- Change the head gasket, but block shit off to redirect water that's been making the same path without issue for 30 fkn years.

4- Report results

What are you even saying dude? Block what shit off?


Sent from my iPhone using Tapatalk

[ClaudeMachining]

Here's reality

1- Get some Splinter looking Cali to OR transplant fuck involved.

2- Get a janitor from Canada involved

3- Change the head gasket, but block shit off to redirect water that's been making the same path without issue for 30 fkn years.

4- Report results

^^ Jelly.

Envoyé de mon SM-G965W en utilisant Tapatalk

[Keno]

What are you even saying dude? Block what shit off?


Sent from my iPhone using Tapatalk

Ignore him. Just replace the head gasket.

[Papalala]

Ignore him. Just replace the head gasket.

Thanks dude!


Sent from my iPhone using Tapatalk