B-shop164 Posted October 11, 2018 Report Share Posted October 11, 2018 I have buy some 21 domes suposed to be cut and machined for +4 stroker crank and 19 cc but it test the squish and he have .078 ... and 160 psi i think he have probleme with the squish? I have .020 base gasket . Its the second set of dome we cut for me and the last have de same . Quote Link to comment Share on other sites More sharing options...
97Screamer Posted October 11, 2018 Report Share Posted October 11, 2018 2 minutes ago, B-shop164 said: I have buy some 21 domes suposed to be cut and machined for +4 stroker crank and 19 cc but it test the squish and he have .078 ... and 160 psi i think he have probleme with the squish? I have .020 base gasket . Its the second set of dome we cut for me and the last have de same . Who did you order the domes from? You sure on the base gasket thickness? Squish should be 0.04-0.05, either the domes are wrong or the base gasket too thick but I'd be surprised that someone would cut the domes for less than a 0.02 base gasket without special ordering them that way. Quote Link to comment Share on other sites More sharing options...
dano3 Posted October 11, 2018 Report Share Posted October 11, 2018 how are you testing the squish and what thickness solder are you using? is this just a stock cylinder 4 mil setup? Quote Link to comment Share on other sites More sharing options...
B-shop164 Posted October 11, 2018 Author Report Share Posted October 11, 2018 24 minutes ago, 97Screamer said: Who did you order the domes from? You sure on the base gasket thickness? Squish should be 0.04-0.05, either the domes are wrong or the base gasket too thick but I'd be surprised that someone would cut the domes for less than a 0.02 base gasket without special ordering them that way. Yeah im 100% sure i have cometic .020 base gasket. And its a oem cilinder ... its to much cut i think lol .078 🤦🏽♂️ Quote Link to comment Share on other sites More sharing options...
B-shop164 Posted October 11, 2018 Author Report Share Posted October 11, 2018 23 minutes ago, dano3 said: how are you testing the squish and what thickness solder are you using? is this just a stock cylinder 4 mil setup? First im testing with .062 solder but he dont touch , after im taking 3mm solder and the squish are done at .078. And its BPRACINGatv.com.. Quote Link to comment Share on other sites More sharing options...
dano3 Posted October 12, 2018 Report Share Posted October 12, 2018 3 hours ago, B-shop164 said: First im testing with .062 solder but he dont touch , after im taking 3mm solder and the squish are done at .078. And its BPRACINGatv.com.. did you remove the head and lay the solder across the entire piston inline with the piston pin? or did you bend it and insert it through the spark plug hole? if done through the plug hole did you only test one side of the piston at a time and inline with the pin? post a picture of how you did it if needed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.