XXDEF1ANTXX Posted August 28, 2018 Report Share Posted August 28, 2018 Hey gang, I have purchased a 2-1 set up from a forumer that came with a 34mm PJ and I need a starting point for jetting it. My motor has Rad Valves, T-6s, stock bore and stroke, and I ride between 0-1000' at 60-80 degrees. The carb came with 215 main, 60 pilot, and EEK needle. Thanks Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted September 2, 2018 Report Share Posted September 2, 2018 How does it run with that set up, could be close with that carb, if you’re not using a 35 or bigger just stay with the stock carbs, you are hindering performance IMO Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted September 18, 2018 Report Share Posted September 18, 2018 That sounds close. Do you have it idling and running at this point? Quote Link to comment Share on other sites More sharing options...
XXDEF1ANTXX Posted September 27, 2018 Author Report Share Posted September 27, 2018 Yes I have it dialed in pretty well actually. I just need to bump the pilot up one more size is all. Im at a 52 pilot and an EEK needle on 4th slot right now which seems awfully large for my stockish motor. I have a pod filter I am using until I buy the 2-1 air box adapter, so I assume the pod filter requires much richer jetting to run correctly. I am replacing this PJ with a PWK the first chance I get. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.