christoph.tamz Posted August 7, 2018 Author Report Posted August 7, 2018 I did check all 16 pedals. Nothing wrong with themSent from my SM-N920V using Tapatalk Quote
christoph.tamz Posted August 7, 2018 Author Report Posted August 7, 2018 I was thinking timing. But the pick ups are rounded in the beginning of the pickup on the flywheel Sent from my SM-N920V using Tapatalk Quote
Ayesully810 Posted August 8, 2018 Report Posted August 8, 2018 100 is so hot to ride in, i almost dont even like riding when its the hot any more. A cooler plug might help too. how much timing does it have? Quote
christoph.tamz Posted August 8, 2018 Author Report Posted August 8, 2018 Stock timing. But I do have a stator plate not installed that's new. I'm leaning against riding in that heat anymore Sent from my SM-N920V using Tapatalk Quote
registered user Posted August 8, 2018 Report Posted August 8, 2018 backfire is electrical malfunction somewhere. since u swapped coils already i would swap cdi next. flywheel tabs shouldnt be rounded over. either someone set the airgap to close or the crankbearings have alot of slop Quote
n2otoofast4u Posted August 8, 2018 Report Posted August 8, 2018 Choke tube is on and in good repair? Quote
christoph.tamz Posted August 8, 2018 Author Report Posted August 8, 2018 Crank bearings are new. I don't have an extra cdi. The only thing I noticed was the pick up tab on the stator was broken on one side. I've replaced that with an oem stator plate. Sent from my SM-N920V using Tapatalk Quote
christoph.tamz Posted August 8, 2018 Author Report Posted August 8, 2018 I have 36mm keihin carbs with no choke tube. Sent from my SM-N920V using Tapatalk Quote
christoph.tamz Posted August 8, 2018 Author Report Posted August 8, 2018 I did notice when I was riding. I was getting a small shock from the tether switch on the bars. I just noticed it's grounded to the bars and not the frame. Would this be a cause?Sent from my SM-N920V using Tapatalk Quote
christoph.tamz Posted August 8, 2018 Author Report Posted August 8, 2018 No change. I did ground it to the chassisSent from my SM-N920V using Tapatalk Quote
Ayesully810 Posted August 8, 2018 Report Posted August 8, 2018 9 hours ago, christoph.tamz said: I did notice when I was riding. I was getting a small shock from the tether switch on the bars. I just noticed it's grounded to the bars and not the frame. Would this be a cause? Sent from my SM-N920V using Tapatalk I had that happen before on my old tether.. I think that happens when it the ground wire is not wired right. I could be wrong Quote
christoph.tamz Posted August 9, 2018 Author Report Posted August 9, 2018 Still not right. It runs but it's acting like an air leak. Sent from my SM-N920V using Tapatalk Quote
Ayesully810 Posted August 9, 2018 Report Posted August 9, 2018 what did you do about the pilot?? what did you have in there and what did you change it to? Quote
christoph.tamz Posted August 12, 2018 Author Report Posted August 12, 2018 Exploded piston. Was still making compression by the 1 ring that was left. Sent from my SM-N920V using Tapatalk Quote
christoph.tamz Posted August 12, 2018 Author Report Posted August 12, 2018 Can I still run my domes even if they are chewed upSent from my SM-N920V using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.