yamahaman244 Posted July 3, 2018 Report Share Posted July 3, 2018 (edited) Hey guys having issue with my banshee and don’t know we’re to start. Motor was redone by hjr runs amazing. Other day oil was spraying out of my front sprocket area. Got it home and found out my sproket seal popped out. Took everything off seal looks good. Put everything back to see if it would do it again. Popped back out once motor got good and hot. What is causing this.? Pressure in my case? Was hoping to ride this 4th but not looking promising. Any help would be great Edited July 3, 2018 by yamahaman244 Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted July 3, 2018 Report Share Posted July 3, 2018 Check the vent over the rear motor mount. Often the tubes gets gummed up with crud or the vent itself gets clogged. Quote Link to comment Share on other sites More sharing options...
yamahaman244 Posted July 3, 2018 Author Report Share Posted July 3, 2018 I’ll go check, figuring it’s building to much pressure. Seal looks good motor only has about 10hrs sense full rebuild. Do I need a new seal? Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted July 3, 2018 Report Share Posted July 3, 2018 New seal every time. Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted July 3, 2018 Report Share Posted July 3, 2018 Just now, trickedcarbine said: New seal every time. new sprocket seal every time it comes out?? Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted July 3, 2018 Report Share Posted July 3, 2018 16 minutes ago, Ayesully810 said: new sprocket seal every time it comes out?? Ya... It shouldn't keep coming out. But yes, always use new seals when doing any service. Quote Link to comment Share on other sites More sharing options...
yamahaman244 Posted July 3, 2018 Author Report Share Posted July 3, 2018 Thanks for help guys I think my breather was pitched rerouted it and blew in it I could hear air inside case. I did put the old seal pack in and ripped it hard didn’t come back out. Hoping it will be fine for the ride. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.