joshpam8 Posted May 22, 2018 Report Posted May 22, 2018 This is a 35mm keihin carb bored to 36.3 should u be able to see light like this beside the slide Sent from my SM-G930V using Tapatalk Quote
Ayesully810 Posted May 22, 2018 Report Posted May 22, 2018 hmm idk at first thought id think no, but ill look at my carbs when i get home someone might answer before i get back to you though Quote
Buckeye513 Posted May 22, 2018 Report Posted May 22, 2018 Definitely shouldn’t see light on either side of the slide. It’s either bored off center or over bored. Take your slide out of your other carb and put it in that one to eliminate it being a worn slide.Sent from my iPhone using Tapatalk Quote
joshpam8 Posted May 22, 2018 Author Report Posted May 22, 2018 Ok thanks Sent from my SM-G930V using Tapatalk Quote
joshpam8 Posted May 22, 2018 Author Report Posted May 22, 2018 Duncan racing did the 403 eliminator kit for me and I couldn't get it to run right my first race when I got it back melted piston in left cylinder they bored and super flowed the carbs for me Sent from my SM-G930V using Tapatalk Quote
joshpam8 Posted May 22, 2018 Author Report Posted May 22, 2018 Definitely shouldn’t see light on either side of the slide. It’s either bored off center or over bored. Take your slide out of your other carb and put it in that one to eliminate it being a worn slide.Sent from my iPhone using TapatalkSame deal with the other slide Sent from my SM-G930V using Tapatalk Quote
Buckeye513 Posted May 22, 2018 Report Posted May 22, 2018 Same deal with the other slide Sent from my SM-G930V using TapatalkDuncan fucked your carb then. I’d tell them fuckers they owe me a new carb and top end.Sent from my iPhone using Tapatalk Quote
joshpam8 Posted May 23, 2018 Author Report Posted May 23, 2018 Duncan fucked your carb then. I’d tell them fuckers they owe me a new carb and top end.Sent from my iPhone using TapatalkYea I'm gonna call them tomorrow they told me I need to run all there parts reed exhaust intake boost bottle. They fucked my fly wheele up when they lightened to. They said I melted the piston cause of a weak stator but I have a new stator cdi coil and plug caps. Had to buy a new fly wheele cause when you shook it it sounded like a bunch of sand in itSent from my SM-G930V using Tapatalk Quote
joshpam8 Posted May 23, 2018 Author Report Posted May 23, 2018 Yea I'm gonna call them tomorrow they told me I need to run all there parts reed exhaust intake boost bottle. They fucked my fly wheele up when they lightened to. They said I melted the piston cause of a weak stator but I have a new stator cdi coil and plug caps. Had to buy a new fly wheele cause when you shook it it sounded like a bunch of sand in itSent from my SM-G930V using TapatalkI only flat track it I don't ride it around it sits in the garage when not racing Sent from my SM-G930V using Tapatalk Quote
Ayesully810 Posted May 23, 2018 Report Posted May 23, 2018 14 minutes ago, joshpam8 said: Yea I'm gonna call them tomorrow they told me I need to run all there parts reed exhaust intake boost bottle. They fucked my fly wheele up when they lightened to. They said I melted the piston cause of a weak stator but I have a new stator cdi coil and plug caps. Had to buy a new fly wheele cause when you shook it it sounded like a bunch of sand in it Sent from my SM-G930V using Tapatalk enough to make me wanna choose a different builder lol Quote
joshpam8 Posted May 23, 2018 Author Report Posted May 23, 2018 enough to make me wanna choose a different builder lol Yea I have had nothing but problems they won't stand behind there work either they wouldn't even work with me at all I was running a 165 main and 55 pilot clip in the middle so I know the jetting was ok Sent from my SM-G930V using Tapatalk Quote
Ayesully810 Posted May 23, 2018 Report Posted May 23, 2018 5 minutes ago, joshpam8 said: Yea I have had nothing but problems they won't stand behind there work either they wouldn't even work with me at all I was running a 165 main and 55 pilot clip in the middle so I know the jetting was ok Sent from my SM-G930V using Tapatalk yeah be assertive when dealing with them. If they dont be sure to make them know you will make them famous on here for their awesome work Quote
joshpam8 Posted May 23, 2018 Author Report Posted May 23, 2018 Yea I have had nothing but problems they won't stand behind there work either they wouldn't even work with me at all I was running a 165 main and 55 pilot clip in the middle so I know the jetting was ok Sent from my SM-G930V using TapatalkBuilt a battery box for it and put an air fuel meter on it seems to work ok Sent from my SM-G930V using Tapatalk Quote
gusto Posted May 23, 2018 Report Posted May 23, 2018 Explain the air fuel meter. You tune the bike from the data? Gives air to fuel ratio? Quote
joshpam8 Posted May 23, 2018 Author Report Posted May 23, 2018 Explain the air fuel meter. You tune the bike from the data? Gives air to fuel ratio?Yea it gives me my air fuel mixture I still look at my plugs though but it does help with tuning and while I'm racing I can see what it's doing if it goes lean I can shut it down without melting a pistonSent from my SM-G930V using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.