mad69camaro Posted March 31, 2018 Report Share Posted March 31, 2018 I have already changed the bushing but it still feels so loose although the bolts are very tight. I can grab it and move it up and down. They only lasted a 3 day trip to Waynoka and I ride hard and fast and like to jump... they were initially a little tighter but didn't last. Please help!! Thank you! Sent from my HTC6535LVW using Tapatalk Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted April 1, 2018 Report Share Posted April 1, 2018 Using the OE dust caps? Quote Link to comment Share on other sites More sharing options...
BlackandYellowBanshee Posted April 2, 2018 Report Share Posted April 2, 2018 (edited) I just had this issue. No matter if it’s new bushings or dust caps it still has play up and down. Like there was play was on the bolt. I fought it forever and went thru everything. I found out that the sleeve inside the upper A arm was either incorrect or worn. I bought new sleeves and tightened it right up. I used the pivot works sleeves if that helps but I’m sure new oem ones will work fine. Edited April 2, 2018 by BlackandYellowBanshee 1 Quote Link to comment Share on other sites More sharing options...
mad69camaro Posted April 2, 2018 Author Report Share Posted April 2, 2018 I just had this issue. No matter if it’s new bushings or dust caps it still has play up and down. Like there was play was on the bolt. I fought it forever and went thru everything. I found out that the sleeve inside the upper A arm was either incorrect or worn. I bought new sleeves and tightened it right up. I used the pivot works sleeves if that helps but I’m sure new oem ones will work fine.Yes that's exactly the same issue I have!!! Thank you so much! I will get some ordered and update after I get it put back together. Sent from my HTC6535LVW using Tapatalk Quote Link to comment Share on other sites More sharing options...
mad69camaro Posted April 2, 2018 Author Report Share Posted April 2, 2018 Using the OE dust caps?Yes I amSent from my HTC6535LVW using Tapatalk Quote Link to comment Share on other sites More sharing options...
BlackandYellowBanshee Posted April 2, 2018 Report Share Posted April 2, 2018 No problem. I’m almost positive that’s your issue. On the pivot works rebuild kit, you will only use the sleeves. Don’t worry about the needle bearings they give you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.