Ayesully810 Posted January 15, 2018 Report Posted January 15, 2018 Here is my new build for 2018. All new dress up, from the ground up. Ill be picking my cylinders up from Lane in March to finish the top end. Gunna finish up the bottom end and seal the cases this week then start on the roller. Everything powdered gloss black including the cases. -7 mil , 68 bore with serval like port timings-vf2s with 35 pwks, tyson pro mod, center mount shearers Im going a different route for a play trail bike this year so thats why i re did my ride and ill be using this for more wide open stuff. Ill be updating this as I go. Getting a head start on this build cause im getting married in june. Sent from my LGMS210 using Tapatalk 1 Quote
specialblend07 Posted January 15, 2018 Report Posted January 15, 2018 FAT ASS. I approve. Post more pictures of that. 2 Quote
Ayesully810 Posted January 16, 2018 Author Report Posted January 16, 2018 (edited) Thanks gusto cant wait to get it all together, gunna be buying the ole lady a quad this spring too for her to ride. I taught her how to use a clutch on that project bike I did this past summer and Steve, yes she loves to do squats but unfortunately for you, thats all yall get, just a teaser haha. Edited January 16, 2018 by Ayesully810 Quote
Canadianshee Posted January 16, 2018 Report Posted January 16, 2018 Going to look nice with those plastics. Cases look good to, I was debating doing that at next setup change. Sent from my LG-H831 using Tapatalk Quote
ClaudeMachining Posted January 16, 2018 Report Posted January 16, 2018 Why 7 and not 10?? You still need the case to be trenched anyway, no? Suspension wize, do you change some stuff?? Envoyé de mon SM-N910C en utilisant Tapatalk Quote
Ayesully810 Posted January 16, 2018 Author Report Posted January 16, 2018 9 minutes ago, Canadianshee said: Going to look nice with those plastics. Cases look good to, I was debating doing that at next setup change. Sent from my LG-H831 using Tapatalk I had a local place around here powder coat and sand blast em for me. 100 bucks total. pretty good deal. Then u saw the place in Gladwin that did my frame and all my stuff for 250. So 350 to get the whole bike done. I am a penny squeezer for sure. Claude I was waiting for that question. I talked to lane about it and he thought 7 would be better for me and what Ill be doing with it. I know everyone is gunna say 10 is the same cost u should go 10 etc but I trust his opinion on things. Crank is from driveline btw as well as my case trenching. Quote
SandSlingerOR Posted January 16, 2018 Report Posted January 16, 2018 Cool I'm going to do 7mill for my duner as well. Quote
Ayesully810 Posted January 16, 2018 Author Report Posted January 16, 2018 Good stuff I think I remember u saying something about that before. This will be used for wide open/ dune stuff Quote
Canadianshee Posted January 16, 2018 Report Posted January 16, 2018 I had a local place around here powder coat and sand blast em for me. 100 bucks total. pretty good deal. Then u saw the place in Gladwin that did my frame and all my stuff for 250. So 350 to get the whole bike done. I am a penny squeezer for sure. Claude I was waiting for that question. I talked to lane about it and he thought 7 would be better for me and what Ill be doing with it. I know everyone is gunna say 10 is the same cost u should go 10 etc but I trust his opinion on things. Crank is from driveline btw as well as my case trenching. There nothing wrong with making your buck go further. I had my cylinders redone when I had them ported. Kicking myself now for not doing the cases now. Keep up with the pics. Sent from my LG-H831 using Tapatalk Quote
Ayesully810 Posted January 16, 2018 Author Report Posted January 16, 2018 I like the look of fully sand blasted stuff too. Claude I'm still rocking the stellar front end and works shocks with rezzies and mcr in the rear with my stock length JL. Sent from my LGMS210 using Tapatalk Quote
ClaudeMachining Posted January 16, 2018 Report Posted January 16, 2018 Noice, cant wait to start mine!!! We ride similar terrain.Envoyé de mon SM-G935W8 en utilisant Tapatalk Quote
Ayesully810 Posted January 16, 2018 Author Report Posted January 16, 2018 7 hours ago, ClaudeMachining said: Noice, cant wait to start mine!!! We ride similar terrain. Envoyé de mon SM-G935W8 en utilisant Tapatalk yeah I found myself riding more hills and wide open stuff with my shee than tight trails. When ever I rode really tight stuff up north I didn't care for it too much, would rather have a diff quad than a banshee for the trails up north. Quote
specialblend07 Posted January 16, 2018 Report Posted January 16, 2018 More pictures of your future ex wife please. Quote
Ayesully810 Posted January 16, 2018 Author Report Posted January 16, 2018 UmmmmmmnoSent from my LGMS210 using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.