Duke 2 Stroke Posted December 26, 2017 Report Share Posted December 26, 2017 I have a 4mill short rod bottom end I just put together and I have a friend of mine that have a set of oem cylinders full drag ported that he took off his 4mill long rod setup. My question is can I use that same top end with my my short rod bottom end Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted December 26, 2017 Report Share Posted December 26, 2017 1 hour ago, Duke 2 Stroke said: I have a 4mill short rod bottom end I just put together and I have a friend of mine that have a set of oem cylinders full drag ported that he took off his 4mill long rod setup. My question is can I use that same top end with my my short rod bottom end You should be able to put them on and run a normal banshee piston instead of the typical Weisco 795 piston. I'd suggest getting a few different base gaskets to mock it up and see where it sits the best. 1 Quote Link to comment Share on other sites More sharing options...
BigP19 Posted January 2, 2018 Report Share Posted January 2, 2018 Same thing no difference, just the long rod is a safer route due to the rod angle but port timing wise your fine 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.