badbonz Posted December 9, 2003 Report Share Posted December 9, 2003 Howdy! Im lookin to put a single carb on my Banshee and would like some help from the members. Any suggestions on size and type? Based on those questions, will I have to do any modifications to the motor itself? Thanks and any help will HELP! badbonz Quote Link to comment Share on other sites More sharing options...
frocashmoney24 Posted December 9, 2003 Report Share Posted December 9, 2003 i'd say put a 33 on there, you dont have to do anything to the engine but you have to get a 2-1 manifold setup, trinity makes one and some others, and you have to get a one airfilter setup for your carb Quote Link to comment Share on other sites More sharing options...
Yamaha350T Posted December 9, 2003 Report Share Posted December 9, 2003 My friend got a single carb kit for his banshee. Trinity sells the whole kit with gaskets, the 35mm carb, the 2 into 1 intake setup, a steel braided throttle cable, and a clamp on k+n filter w/ outerwear for $490. Its not bad for what it does for your banshee. If I had the money, I would get it definitely. It cleans the motor compartment up a lot, and gives you a lot more space for working on it. Its also easier to tune one carb instead of two. They put a jet in it for you for a banshee with pipes and the clamp on obviously. The bike has way more low end now. It started the second kick after putting it on . Its definitely a good part to get. Quote Link to comment Share on other sites More sharing options...
bansheeDUDE Posted December 12, 2003 Report Share Posted December 12, 2003 I would definetly go trinity stage 4. 2-1 manifold. My neighbor has it on his shee. what a diffrence! And they give you every thing you need. Plus no motor mods are nessesary. Quote Link to comment Share on other sites More sharing options...
raxen Posted December 12, 2003 Report Share Posted December 12, 2003 A holley dominator with custom manifold, no but really; What are your engine mods before you do anything that effects the performance of your shee such as the carb size? Since you didn't list anything can we assume stock? Piped? Ported? Quote Link to comment Share on other sites More sharing options...
cmyyard19 Posted December 12, 2003 Report Share Posted December 12, 2003 I just bought a trinity cv 35mm carb set up for my banshee and today was the first day I got to open it up. It is one sweet set up. I think it is definitely worth the money. Quote Link to comment Share on other sites More sharing options...
ledofthezep Posted December 12, 2003 Report Share Posted December 12, 2003 My g/f's shee has a graydon proline 2:1 w/35pwk. Runs damn good, no complaints. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.