Banshee SE Posted November 17, 2017 Report Share Posted November 17, 2017 Is this thing useable or not? What you guys think? Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
ZillaFreak Posted November 17, 2017 Report Share Posted November 17, 2017 You can try to lap it, but I wouldn't waste the time personally. 1 Quote Link to comment Share on other sites More sharing options...
Toybreaker Posted November 17, 2017 Report Share Posted November 17, 2017 yes, if you know what you are doing that is absolutely repairable/usable. DIY mechanic? don't bother........ you will fuck up the taper and it will not seat properly causing all kinds of electrical mischief. 1 Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted November 17, 2017 Report Share Posted November 17, 2017 I’ve run WAY worse than that. Clean it up. Put it on. It’ll be fine. Quote Link to comment Share on other sites More sharing options...
JUSTWANNARACE Posted November 17, 2017 Report Share Posted November 17, 2017 Put some Dykum on the inside of the flywheel and crank. Lap in with valve lapping compound until all Dykum is removed. Coat the inside of flywheel with some blue loc-tite to create a thin barrier between the 2 metals to avoid electrolysis and pitting. Install as normal. Should be good to go.. jmo 1 Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted November 18, 2017 Report Share Posted November 18, 2017 run it and find out. Takes 2 mins to put a fly wheel on then remove it. Im with ty ty ive ran worse and they worked fine Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted November 18, 2017 Author Report Share Posted November 18, 2017 Personally I wont use it but I would like to sell it but first I wanted to know if it can be used like that. Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted November 18, 2017 Author Report Share Posted November 18, 2017 I’ve run WAY worse than that. Clean it up. Put it on. It’ll be fine. Yea right!! You, I doubt it!! Lol Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted November 18, 2017 Report Share Posted November 18, 2017 Yea right!! You, I doubt it!! LolI have. Not even kidding. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted November 18, 2017 Report Share Posted November 18, 2017 Lap it then give it a dab of anti sieze. Quote Link to comment Share on other sites More sharing options...
spurdy Posted November 19, 2017 Report Share Posted November 19, 2017 Lap it then give it a dab of anti sieze. ^^^this. I wouldn't use loktight on the taper. That's just me. Well, me and this guy. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Yeepo Posted November 24, 2017 Report Share Posted November 24, 2017 Mine looked worse than that one. I lapped it real good and its holding fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.