Fox float 3

[06YFZ350]

12 minutes ago, locogato11283 said:

You’re going to want them about 130-140 PSI.

Ok cool because i read the manual and the setting it was giving was for the evol with 2 chambers and i did not see it talk about the single chamber pressures.

[Lowflyin]

I rode a little more on mine yesterday. I'm about 155-160 with gear on and am liking them around 65psi

Sent from my LG-H820 using Tapatalk

[Lowflyin]

Here's what fox told me. Im not sure how high the 3s are good to

Sent from my LG-H820 using Tapatalk

[locogato11283]

That’s nonsense. Fox employees are dumb as fuck. 55psi will feel like mush.

 

Standard Floats are 0-150psi.

 

I run ours on the drag bikes at 140-150.

[ZillaFreak]

Or you could just pick a number, start there and adjust the pressure till it is something you like.

[Lowflyin]

I agree with Tyler , i tried their recommendation first off and could tell it was too soft from the garage. I would rather start low and work my way up personally.

Sent from my LG-H820 using Tapatalk

[ban565]

I ordeed fox float 3 Wesnesday

[06YFZ350]

14 hours ago, ban565 said:

I ordeed fox float 3 Wesnesday

are you using stock a arms? if so i had to do some cutting on them to get the shocks to fit without hitting.

[ban565]

I'm putting them on the drag bike.

[Lowflyin]

Rode on Mine a good bit yesterday, hard trail riding. Still pleased but back needs work bad. I'm waiting until i grab a +4 swing arm though . going port injection and even bigger turbo on my car now though..

Sent from my LG-H820 using Tapatalk