Meezy420 Posted October 24, 2017 Author Report Share Posted October 24, 2017 I just bought. Rebuild kit so it is the oem jetting size plus i set the clip on the needle on 2 from top of needle... I HAVE vito's performance pipes fat bastards came with the bike plus :moose boost bottle And i will fix the reed I'll order ones tomorrow... Quote Link to comment Share on other sites More sharing options...
Meezy420 Posted October 24, 2017 Author Report Share Posted October 24, 2017 Idk why i set the needle jet to 2 from top i was watching video but realized that i have stock jetting... Quote Link to comment Share on other sites More sharing options...
Rippin'n'Runnin Posted October 24, 2017 Report Share Posted October 24, 2017 Ditch the boost bottle and get some vf4 reeds if in the budget Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted October 24, 2017 Report Share Posted October 24, 2017 if ur running stock jetting (200 main and 25 pilot) that main will be way small if you have those fat bastard pipes on. Things to consider as well. 1. if the idle screw nubs (where they screw in at) have been filed down at all, when the tors gets deleted and you drill and tap those threads on there the idle screw housing has to be filed down to give the screw enough adjustment. 2. get a cross over tube instead of boost bottle. 3. watch a video on how to sync your carbs (look up south texas banshee on youtube) that will be easier than trying to type it out. Quote Link to comment Share on other sites More sharing options...
Meezy420 Posted October 24, 2017 Author Report Share Posted October 24, 2017 I think i am watching south texas banshee i watch his sync videos alot trying to tune it right will do i will get rid of the boost bottle.. I gotchu with all the research ive been doing your right i do need to get a bigger main and pilot they suggested that i go 350 main and 27.5 pilot?? Any advice Will get new reed (VF4) It does seem like it has been drilled and tapped right my mistake i just dont trust any previous owners... on any thing they only are interested n getting rif of there problem most times but i Gladly took on the banshee and i dont even work on bike like that i usally send them to shop Also any reason why one spark plug filed out and one looks brand new plus the pipe only smoke on the left side the side that the plug filed on.... Right side no smoke out pipe brand new plug no file (like it never been touched) Left side smoking out pipe new plug filed on me (both plugs were new) Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted October 24, 2017 Report Share Posted October 24, 2017 (edited) my head hurts reading that lol my gosh 350 main? that's rich af on a stock motor. if ALL you have done to your bike is pipes and reeds (assuming your going to jet this bike with vf4s) a 27.5 pilot will do and your main will probably be around 290 to 300 id buy 290 thru 310 to be safe. depending on temps and elevation your jetting might be different than others. you said you got your stuff from vitos? if you have their needle you will probably be in the middle or 4th clip. While you have that stuff off id pressure test just to make sure you don't have air leaks like RAJUN said Edited October 24, 2017 by Ayesully810 Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted October 25, 2017 Report Share Posted October 25, 2017 A must with a new to you bike. Pressure test, compression test, electronic equipment test. Service manual to save yourself a lot of typing and headaches 1 Quote Link to comment Share on other sites More sharing options...
Meezy420 Posted October 25, 2017 Author Report Share Posted October 25, 2017 (edited) Lol my bad just not trynimg to spend a paragraph of money at the shop they smoke cigarettes while you pay for labor lol bastards haha i was waiting on somebody to tell me i type too much haha Ok will do compression test and electronic test... Edited October 25, 2017 by Meezy420 Might start sending videos lol Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted October 25, 2017 Report Share Posted October 25, 2017 AND A LEAKDOWN TEST (pressure test) now and everytime you have something apart - like reeds See what jets were in it when you got it -Do NOT use the jets that came in the rebuild kit. Download Tapatalk and post pics. The reeds are bent thing... V-Force carbon fiber doesn't bend it breaks Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted October 25, 2017 Report Share Posted October 25, 2017 And use the plural form of words that refer to more than one... Carb(s) Kit(s) etc. Quote Link to comment Share on other sites More sharing options...
Meezy420 Posted October 25, 2017 Author Report Share Posted October 25, 2017 Gotcha Quote Link to comment Share on other sites More sharing options...
Meezy420 Posted October 27, 2017 Author Report Share Posted October 27, 2017 so this is my right reed had a hard time finding what generation of vforces i had but they are delta 2... I guess thats why my right plug was brand new looking and no smoke out the right pipe.. also smoke out the carbs... i guess the piston was shooting back at the carbs but no spark... Can i put cages on my fvorce 2 reeds?Just asking before i buy the vforce 4 reeds... they say vforce 2 reeds had better flow than vf3s... Quote Link to comment Share on other sites More sharing options...
Meezy420 Posted October 27, 2017 Author Report Share Posted October 27, 2017 Oh yea and where do you think the rest of the plate chunk went at? do you think it did some damage because my bike still starts properly?? it just takes a couple kicks and i will sent a picture piston because I cant tell if my pistons are good.. Quote Link to comment Share on other sites More sharing options...
Keno Posted October 28, 2017 Report Share Posted October 28, 2017 You have cages, you need new reed petals. You'll need 2 of these https://farmandsandtoys.com/ocart2/v-force-2-replacement-reeds-banshee.htmlThe piece of petal missing most likely blew out the exhaust Quote Link to comment Share on other sites More sharing options...
Meezy420 Posted October 28, 2017 Author Report Share Posted October 28, 2017 Ok thanks will do... i was wondering can i modify the vforce 2 and put the little metal curved braces on the piston side of the reed.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.