WALZ Posted October 7, 2017 Report Share Posted October 7, 2017 Wish I could get $2k for this bike as she sits in my neck of the woods. If I could get $900 plus shipping for the stock engine I'll break down the rest of the parts.... really don't want to break down, $1800 would take it. 1999 stock engine. purchased 100% stock for the wife in '05. Did top end and then frame off restoration powder coat at that time. Make 3 trips a year at best with some 2+ year breaks in between. Put another OEM piston/ring/gasket/reed pedals in summer 2016 for good measure still had cross hatches in cylinder. Checked bottom end in Sept 2017: holds 6 psi for 15+ minutes. changed out countershaft and shift seal last year. runs well and ready to rip. if DM doesn't work, text does: 208-703-1168 Boise, Idaho Can text more pics banshee 2 Quote Link to comment Share on other sites More sharing options...
WALZ Posted October 7, 2017 Author Report Share Posted October 7, 2017 I can't get the better pictures smaller on this G&@ forsaken IMAC. Text for more photos if SERIOUS. Good Haulers, +6 swing and plenty of cascade billet. Quote Link to comment Share on other sites More sharing options...
WALZ Posted October 7, 2017 Author Report Share Posted October 7, 2017 (edited) Edited October 7, 2017 by WALZ more pics Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted October 7, 2017 Report Share Posted October 7, 2017 Could pm me sone closer pictures of the engine? Quote Link to comment Share on other sites More sharing options...
WALZ Posted October 7, 2017 Author Report Share Posted October 7, 2017 Could you text me? 208-703-1168. I'll grab a few photos now and attempt to PM with attachments. Quote Link to comment Share on other sites More sharing options...
WALZ Posted October 7, 2017 Author Report Share Posted October 7, 2017 1 hour ago, Banshee SE said: Could pm me sone closer pictures of the engine? Quote Link to comment Share on other sites More sharing options...
jeremyshee Posted October 7, 2017 Report Share Posted October 7, 2017 Wish I could get $2k for this bike as she sits in my neck of the woods. If I could get $900 plus shipping for the stock engine I'll break down the rest of the parts.... really don't want to break down, $1800 would take it. 1999 stock engine. purchased 100% stock for the wife in '05. Did top end and then frame off restoration powder coat at that time. Make 3 trips a year at best with some 2+ year breaks in between. Put another OEM piston/ring/gasket/reed pedals in summer 2016 for good measure still had cross hatches in cylinder. Checked bottom end in Sept 2017: holds 6 psi for 15+ minutes. changed out countershaft and shift seal last year. runs well and ready to rip. if DM doesn't work, text does: 208-703-1168 Boise, Idaho Can text more pics banshee 2Where r u locatedSent from my VS425PP using Tapatalk Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted October 9, 2017 Report Share Posted October 9, 2017 Crazy that's a 3500 bike all day by me Quote Link to comment Share on other sites More sharing options...
Jetnbyu93 Posted October 9, 2017 Report Share Posted October 9, 2017 Crazy that's a 3500 bike all day by me You got that right - if it was closer to me it would be gone and sitting in my garage right now. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
WALZ Posted October 10, 2017 Author Report Share Posted October 10, 2017 Bike is in Boise, ID. Got it on CL Boise and Utah CL with delivery. No takers. If the bike is anywhere near $3k where you are you could get bids on uShip. Wait about 5 days and they'll bid each other down. People ask lots of $$$ but I don't think they get it. I sold a long travel, redline built, ported, race gas Serval last year. +6, dunable, 8 hrs on build w/ documentation, fresh 22" superlights, very sharp bike it took months to get $5k in Portland in May-July. There are some collectors that pay for stock time capsules but other than that I see many Banshees sit years with ridiculous asking prices. i picked up a show quality 4 mil for $3,800 last month (this bike's replacement). $1800 is likely market value in the west and maybe $500 more toward the E Coast. I believe someone could make at least an additional $500 on the part out. Quote Link to comment Share on other sites More sharing options...
WALZ Posted October 10, 2017 Author Report Share Posted October 10, 2017 Banshee sold Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted October 10, 2017 Report Share Posted October 10, 2017 please tell me you got 1800 for it Quote Link to comment Share on other sites More sharing options...
jeremyshee Posted October 10, 2017 Report Share Posted October 10, 2017 please tell me you got 1800 for itHell, here in Pa that would have pulled 3500 all daySent from my VS425PP using Tapatalk Quote Link to comment Share on other sites More sharing options...
WALZ Posted October 11, 2017 Author Report Share Posted October 11, 2017 Call me at 208-703-1168 if you seriously want me to haul bikes and split profits then. There are two more banshees in my area for $2k. I'll put out want to buy ads and scoop more up when people are looking for xmas cash. I'll inspect and hold, then drive at least a few out early next spring ... but only if you have enough confidence to throw down 1/2 the cash. I'm also deep into R's, 02+ CR's and 92+ CR500's. i had a few people willing in the next couple weeks for $1800. Yes, that is what I received. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.