martin059 Posted September 30, 2017 Report Posted September 30, 2017 I just put on some pc pipes on my Shee and I wanted to know what to do about the Jetting do I have to change the main? That is the only mod I have on the banshee. Sent from my iPhone using Tapatalk Quote
BBoy69 Posted September 30, 2017 Report Posted September 30, 2017 I just put on some pc pipes on my Shee and I wanted to know what to do about the Jetting do I have to change the main? That is the only mod I have on the banshee. Sent from my iPhone using TapatalkYesSent from my SM-N920V using Tapatalk Quote
martin059 Posted September 30, 2017 Author Report Posted September 30, 2017 What size jet should I change it too?Sent from my iPhone using Tapatalk Quote
IceracerX Posted October 1, 2017 Report Posted October 1, 2017 (edited) I'm rockin 300 mains and 30 pilots in the summer months with my Pro Circuits. Edited October 1, 2017 by IceracerX Quote
Toybreaker Posted October 2, 2017 Report Posted October 2, 2017 elevation, temp, air box lid/no lid, filter, oil premix ratio all play into jetting. What does the instructions say? if you bought em used what does the website say? great place to start.... I have FMF's, VF2's, K&N, 32:1 927, with stock carbs 270 mains, 27.5 pilots, toomey needle 2 notches from the bottom. It was just slightly rich last time I did a plug chop. 1000 ft elevation @ 71* Quote
sleeper06 Posted October 8, 2017 Report Posted October 8, 2017 We def need to know about the intake side of system Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.