jeremyshee Posted September 30, 2017 Report Share Posted September 30, 2017 So went to watch some hillclimb racing this past weekend here in pa n would love to try it next year. Only like 4 banshees there against 30 450's, only one shee worth a damn but blew up. Anyway, not gonna be hard core hillshooter, would like to try a 10 mill (never have). Need to know what type of porting, ideal length of swingarm, will b done on dirt so tire type, just spent a ton on elkas for my other shee but what I need there too. Yes this is serious, fuckin hate those four pokes killing shit, ill spend whatever. Would like to get a builder going on the motor while I wait on suspension and swing arm. Any advice is appreciated Sent from my VS425PP using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
special06shee Posted September 30, 2017 Report Share Posted September 30, 2017 10cub on race gas will make 110ish hp. Id imagine you would want somewhere around a 6 over 8 over swing arm. Id run a fox shock if money wasent and issue. Only tire i ever like on dirt for high hp setups were 22" ambush. Give cameron a call for the motor. I really liked my 10cub he did. Quote Link to comment Share on other sites More sharing options...
jeremyshee Posted September 30, 2017 Author Report Share Posted September 30, 2017 10cub on race gas will make 110ish hp. Id imagine you would want somewhere around a 6 over 8 over swing arm. Id run a fox shock if money wasent and issue. Only tire i ever like on dirt for high hp setups were 22" ambush. Give cameron a call for the motor. I really liked my 10cub he did. Sweet, thanks man. Answered my next question, redline it is. Fox sounds good too, don't really care a whole lot for my elkas, it was just a price was right thing. Hope it turns out good, saw what a few others 10mil cubs cost them. This will b it for me for a while.Sent from my VS425PP using Tapatalk Quote Link to comment Share on other sites More sharing options...
jeremyshee Posted September 30, 2017 Author Report Share Posted September 30, 2017 10cub on race gas will make 110ish hp. Id imagine you would want somewhere around a 6 over 8 over swing arm. Id run a fox shock if money wasent and issue. Only tire i ever like on dirt for high hp setups were 22" ambush. Give cameron a call for the motor. I really liked my 10cub he did. Also i always have bought lonestar stuff. Is there a cheaper option without sacrificing quality as far as swingarm? And would u cut every other row off the ambushes?Sent from my VS425PP using Tapatalk Quote Link to comment Share on other sites More sharing options...
special06shee Posted September 30, 2017 Report Share Posted September 30, 2017 I really like fireball products as far as swing arms and a arms. But it their stuff is also pricey. Quote Link to comment Share on other sites More sharing options...
jeremyshee Posted September 30, 2017 Author Report Share Posted September 30, 2017 I really like fireball products as far as swing arms and a arms. But it their stuff is also pricey. I'm up for trying new stuff, actually saw quite a few others are using fireball stuff.Sent from my VS425PP using Tapatalk Quote Link to comment Share on other sites More sharing options...
JTmachining Posted October 1, 2017 Report Share Posted October 1, 2017 Fireball is top notch 1 Quote Link to comment Share on other sites More sharing options...
JUSTWANNARACE Posted October 1, 2017 Report Share Posted October 1, 2017 As much as I cringe to say this (his head doesn't need to get any bigger) tyler (locogato) would be one that has done this and can point you in the right direction. Just be Thick skined and don't take his comments personal (kinda like talking to a teenager) when he gives you advice. But he may be a welth of knowledge in the direction you want to go on your build. Quote Link to comment Share on other sites More sharing options...
jeremyshee Posted October 1, 2017 Author Report Share Posted October 1, 2017 As much as I cringe to say this (his head doesn't need to get any bigger) tyler (locogato) would be one that has done this and can point you in the right direction. Just be Thick skined and don't take his comments personal (kinda like talking to a teenager) when he gives you advice. But he may be a welth of knowledge in the direction you want to go on your build. Ill look him up on here, thanks. And ill take no offense, i laugh my ass off regularly on here from the comments, mostly cause fucktards ask for advise then don't take it. There's a few like special 06 and aeusully, that have helped a lot in the past and continued to do so. I take everyone advise and always am open to moreSent from my VS425PP using Tapatalk Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 2, 2017 Report Share Posted October 2, 2017 It's too bad the AMA and local districts killed the ATV hillclimb scene. I was big into it from 2004-2014. Quote Link to comment Share on other sites More sharing options...
jeremyshee Posted October 2, 2017 Author Report Share Posted October 2, 2017 It's too bad the AMA and local districts killed the ATV hillclimb scene. I was big into it from 2004-2014. Were you at a place called ski sawmill in pa last weekend?Sent from my VS425PP using Tapatalk Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 2, 2017 Report Share Posted October 2, 2017 Were you at a place called ski sawmill in pa last weekend?Sent from my VS425PP using TapatalkNo. I haven't been on a hill since 2014. Quote Link to comment Share on other sites More sharing options...
jeremyshee Posted October 2, 2017 Author Report Share Posted October 2, 2017 No. I haven't been on a hill since 2014. Anyway I share could use some info on a hillclimb racing (3 wide) build. Would like a 10mil, need to know what type of porting, pipes, carbs, suspension, swing arm and anything else. Some knowledgeable people gave some good advice already but more is always welcome. They say u know your shit when it comes to hillshootingSent from my VS425PP using Tapatalk Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 2, 2017 Report Share Posted October 2, 2017 How much do you weigh?What's your budget? Quote Link to comment Share on other sites More sharing options...
jeremyshee Posted October 2, 2017 Author Report Share Posted October 2, 2017 How much do you weigh?What's your budget?I'm 170, could spend about 5 on the motor (already have 10mil crank)(billet) and maybe 3 on the chassis.Sent from my VS425PP using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.