Banshee508 Posted August 25, 2017 Report Share Posted August 25, 2017 Hey every one new to the forms but have had a banshee fow a long time now but just recently it started to not want to run after i go into 4-6 gear but will run fine all day untill i hit those gears when after going fast i shut it off gas comes out of the overflow hoses an then if i start it back up it wants to spit an spudder like its running on one cylinder And the lights stoped working too If i were to go start it now it would start on one or two kicks on half choke and could any one tell me what size screw hold the pusle coil on striped one of mine trying to get it off Quote Link to comment Share on other sites More sharing options...
Banshee508 Posted August 26, 2017 Author Report Share Posted August 26, 2017 Any one????! Quote Link to comment Share on other sites More sharing options...
blowit Posted August 27, 2017 Report Share Posted August 27, 2017 I think you need to start with a good carb clean and know what you are doing! So far it sounds like possibly some plugged jet issues and needle/seat leaking. Clean carbs and start there. Quote Link to comment Share on other sites More sharing options...
Banshee508 Posted August 30, 2017 Author Report Share Posted August 30, 2017 I took it apart an cleaned that carb an it starts better but i havnt tried going fast The needle on that carb looks a lil worn so gunna replace both sides on it the pulse coil was off so gap was to big Reeds look ok its running 240 an think .25 jets in it Want to post a pic but there to big Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.