Ayesully810 Posted August 21, 2017 Report Share Posted August 21, 2017 For this on craigslist for 1k. Guy told me the motor was fine except the top end and needed a bore. Open it up and found broken teeth on the clutch basket and idler gear. Also the countershaft was bent on the tranny. Came with lots of extra parts even though most of it was rusty af. Turning out halfway decent so far considering it was a pile of scrap when I picked it up. Plan on selling it when Im done. Just cleaned the cases the other day and replaced the bent countershaft. Just gotta finish this roller and put the motor back together. Sent from my LGMS210 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted August 21, 2017 Author Report Share Posted August 21, 2017 Half ass job on the clutch cover but the silencers turned out good. 400 grit 800 1000 then 1500. 00 steel whool then mothers. Sent from my LGMS210 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
hicksons Posted August 21, 2017 Report Share Posted August 21, 2017 Nice frame clean black I like that Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted August 21, 2017 Author Report Share Posted August 21, 2017 Nice frame clean black I like that Sent from my iPhone using TapatalkThanks. Yeah just rattle canned gloss black. Looks good actually. Budget restore, so rattle can it was. Sent from my LGMS210 using Tapatalk Quote Link to comment Share on other sites More sharing options...
hicksons Posted August 21, 2017 Report Share Posted August 21, 2017 It's clean for wat it is Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
SandSlingerOR Posted August 22, 2017 Report Share Posted August 22, 2017 Drag build ur planning? Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted August 22, 2017 Author Report Share Posted August 22, 2017 This is just a project that I am going to sell when I am done. Roller should be all put together tomorrow and hopefully Friday I can get the motor all sealed up. Quote Link to comment Share on other sites More sharing options...
hicksons Posted August 22, 2017 Report Share Posted August 22, 2017 Can't wait to see piks Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
hicksons Posted August 22, 2017 Report Share Posted August 22, 2017 Gets me excited to try and do mine one day hahahhaSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted September 1, 2017 Author Report Share Posted September 1, 2017 Roller is done except brakes. Cases sealed. Polished a few parts while im waiting to get a few more things. Motor will be done tomorrow.Sent from my LGMS210 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted September 5, 2017 Author Report Share Posted September 5, 2017 Almost there. Should be finished buttoning everything up tomorrow. Sent from my LGMS210 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted September 6, 2017 Author Report Share Posted September 6, 2017 Nobody cares but im still updating this lol it has spark so good to know the flywheel and cdi wasnt junk either. Trying to shoot for first start up tomorrow. Sent from my LGMS210 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Canadianshee Posted September 6, 2017 Report Share Posted September 6, 2017 Looks good. For the price you paid its turning out good. Should be able to sell for a profit. Sent from my LG-H831 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted September 6, 2017 Author Report Share Posted September 6, 2017 6 minutes ago, Canadianshee said: Looks good. For the price you paid its turning out good. Should be able to sell for a profit. Sent from my LG-H831 using Tapatalk That's the plan.. Its bored .020 over stock with pro lites, macdaddy pancake bearing, all new stock clutch components, idler gear, all new bottom end seals, compulsive concepts harness behind the gas tank cdi kill switch tether, ceramic coated t5s polished silencers, extended axle. Should be a nice little stock bike, nothing special obviously but good for someone just starting out or looking for a base to build off of. Quote Link to comment Share on other sites More sharing options...
Canadianshee Posted September 6, 2017 Report Share Posted September 6, 2017 That's the plan.. Its bored .020 over stock with pro lites, macdaddy pancake bearing, all new stock clutch components, idler gear, all new bottom end seals, compulsive concepts harness behind the gas tank cdi kill switch tether, ceramic coated t5s polished silencers, extended axle. Should be a nice little stock bike, nothing special obviously but good for someone just starting out or looking for a base to build off of.Nice, Should be a easy flip. Wish that kind of deal was around here. Sent from my LG-H831 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.