pipmaster421 Posted August 20, 2017 Report Share Posted August 20, 2017 im looking for some banshee exhaust clamps let me know what you got thank you 4794226128 cell Quote Link to comment Share on other sites More sharing options...
pipmaster421 Posted August 24, 2017 Author Report Share Posted August 24, 2017 bump Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted August 24, 2017 Report Share Posted August 24, 2017 bumpWhat pipe you got?? If you have pipes with 1" and 1.125" tube diameter, i got some nice one.Envoyé de mon SM-G935W8 en utilisant Tapatalk Quote Link to comment Share on other sites More sharing options...
pipmaster421 Posted August 25, 2017 Author Report Share Posted August 25, 2017 there the old school fmf fatty Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted August 25, 2017 Report Share Posted August 25, 2017 I dont have experience with banshee pipe. I dont know if fmf fatty fit them.Like i said, if you measure them and if they are close to 1" and.1.125" i have very nice clamps that no other one are making, dual diameter, easy to put on and off.Envoyé de mon SM-G935W8 en utilisant Tapatalk Quote Link to comment Share on other sites More sharing options...
Schweet97Z Posted August 25, 2017 Report Share Posted August 25, 2017 Claude how is the clear tubes holding up so far? Do you have a lot of ride time with the clamps? They look nice. Good workSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
pipmaster421 Posted August 25, 2017 Author Report Share Posted August 25, 2017 same ones ive got on my kids bike do you have the rubber gasket that goes inside them Quote Link to comment Share on other sites More sharing options...
Schweet97Z Posted August 25, 2017 Report Share Posted August 25, 2017 same ones ive got on my kids bike do you have the rubber gasket that goes inside themThey are not Cascade clamps. They are similar in looks but He makes these clamps to his specs with his own rubbers. That's why he told you to measure your pipe. You need the head pipe and stinger diameter where the two meet up. Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
pipmaster421 Posted August 25, 2017 Author Report Share Posted August 25, 2017 ok ill get that tomorrow how much are they Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted August 25, 2017 Report Share Posted August 25, 2017 Claude how is the clear tubes holding up so far? Do you have a lot of ride time with the clamps? They look nice. Good workSent from my iPhone using TapatalkI got about 250L burned so far and my exhaust temps are high and they hold pretty good. I can also give the name of the place where i got the tube, so you can buy some spare.Envoyé de mon SM-G935W8 en utilisant Tapatalk Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted August 25, 2017 Report Share Posted August 25, 2017 They are not Cascade clamps. They are similar in looks but He makes these clamps to his specs with his own rubbers. That's why he told you to measure your pipe. You need the head pipe and stinger diameter where the two meet up. Sent from my iPhone using Tapatalk^^This.Thats why mine doesn't have the bulky hose in it. It dont need a thick tube 'cause my clamps are dual diameter.More machining time, but the clamp is easy to put on and off and seal perfectly.Envoyé de mon SM-G935W8 en utilisant Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
kawa110 Posted August 25, 2017 Report Share Posted August 25, 2017 I too am interested in clamps that won't seep oil. I will be measuring me fmf's when I get home. 1 Quote Link to comment Share on other sites More sharing options...
Canadianshee Posted August 25, 2017 Report Share Posted August 25, 2017 Claude are the measurements both outside diameters of the head and the stinger pipe connects. From looks of it FMF Fatty head pipe OD is 1.007", FMF Power Core silencer stinger pipe is 1.114" OD and 1.003" ID, if these will work on me I like to support local and BHQ sponsors Sent from my LG-H831 using Tapatalk Quote Link to comment Share on other sites More sharing options...
pipmaster421 Posted August 26, 2017 Author Report Share Posted August 26, 2017 mine are ruffly the same size Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted August 26, 2017 Report Share Posted August 26, 2017 Claude are the measurements both outside diameters of the head and the stinger pipe connects. From looks of it FMF Fatty head pipe OD is 1.007", FMF Power Core silencer stinger pipe is 1.114" OD and 1.003" ID, if these will work on me I like to support local and BHQ sponsors Sent from my LG-H831 using TapatalkThey will work!!Envoyé de mon SM-G935W8 en utilisant Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.