Clutch arm actuator bearing removal

[kawa110]

Just trying to find out the easiest way to remove the clutch arm actuator bearing...

 

Maybe someone could hook me up with a link for the proper size pilot bearing remover.

 

I don't want to break these cases.

Thanks

[sheerider11]

Harbor freight blind bearing puller. Has a few sizes. The 2nd smallest one fits

Sent from my SAMSUNG-SM-G891A using Tapatalk

[kawa110]

Thank you sir

[kawa110]

slide hammer, four collets: 3/8 in. to 1/2 in, 9/16 in. to 11/16 in, 5/8 in. to 1 in, 1 in. to 1-1/4 in, convenient carrying case

[sheerider11]

That's it.

Sent from my SAMSUNG-SM-G891A using Tapatalk

[trickedcarbine]

Titties^

[Buckeye513]

Shop eBay got the same set for $32 shipped. Just FYI


Sent from my iPhone using Tapatalk

[Ayesully810]

Hey how did this work out for u? I need to do the same on my new cases

[kawa110]

Worked great!
Used it on 3 other non banshee applications since I purchased it.

[Ayesully810]

how did u put the new bearing in?

[kawa110]

Lube and gently tapped it down with a socket. Gently I was afraid of breaking the case. Went in easy.

[Ayesully810]

sweet if u could, Im gunna go to harbor freight Friday and pick that up, can you PM how to use that thing, I forgot my helmet at home today so my brain is not working right

[kawa110]

No problem. Very easy....

[JUSTWANNARACE]

Heat the cases with a propane torch and the bearing will drop right in

[kawa110]

Obviously beer first.

You will see how it actually works when you open the case.

Find correct size for hole.

Yes remove the washer and seal first.

Tighten the expanding attachment to the bearing, ensure your deep enough, but not in the case.

Attach the slide hammer

Slide the hammer up, and it will “tug” the bearing out.

 

 

Yes heat the cases and it will fall in.

I believe I put the bearing in freezer then lubed and tapped it in.