Ride2fast Posted April 30, 2018 Report Posted April 30, 2018 I would love to hear from someone who is running Alba AND has owned AC, XRF, DG etc pro pegs. the price and looks of the Alba are hard to pass up. Seems like people love them or hate them with no middle ground. albaSent from my iPhone using Tapatalk Quote
Canadianshee Posted April 30, 2018 Report Posted April 30, 2018 http://www.hsdracing.com/Yamaha-Banshee-AC-Racing-MX-Peg-Nerf-Heel-Peg-Prodview.htmlSee start of post. Pre and post powder. No rattle very solid on sale. If you e mail hsd they will confirm stock and shipping to you. Sent from my LG-H831 using Tapatalk Quote
Canadianshee Posted April 30, 2018 Report Posted April 30, 2018 Emailed themGusto since your in Canada make sure you ask them to check their Winnipeg warehouse save on shipping if they have it in stock there. Sent from my LG-H831 using Tapatalk Quote
gusto Posted April 30, 2018 Report Posted April 30, 2018 2 hours ago, Ride2fast said: alba Sent from my iPhone using Tapatalk Have you even tested these yet? I hear kicking is a real pain with the Alba, true? Quote
Ride2fast Posted April 30, 2018 Report Posted April 30, 2018 Have you even tested these yet? I hear kicking is a real pain with the Alba, true?I have not tried yet Sent from my iPhone using Tapatalk Quote
Lowflyin Posted April 30, 2018 Author Report Posted April 30, 2018 That sucks. I guess I lucked out with no issues. But your right the finish does suck, but they hold up real well. Sent from my LG-H831 using TapatalkYa I mean they're good quality , better than pro armor 100% just fit bad for me.Sent from my LG-H820 using Tapatalk Quote
Ayesully810 Posted April 30, 2018 Report Posted April 30, 2018 I had a buddy who ran pro pegs i liked them better than alba's the kicker always gets caught not enough foot room when starting jmo they looks sweet tho Quote
Canadianshee Posted April 30, 2018 Report Posted April 30, 2018 Ya I mean they're good quality , better than pro armor 100% just fit bad for me.Sent from my LG-H820 using TapatalkMust have been welded on a Friday at end of shift lol. At least you got them on, you will be happy with them Sent from my LG-H831 using Tapatalk Quote
Ayesully810 Posted April 30, 2018 Report Posted April 30, 2018 (edited) 18 hours ago, gusto said: Have you even tested these yet? I hear kicking is a real pain with the Alba, true? YES, you gotta give it some juice to kick it and get a full crank they r restrictive Edited April 30, 2018 by Ayesully810 Quote
bluebanshee98 Posted April 30, 2018 Report Posted April 30, 2018 IMO the old school ac propegs are still the best ones to date wether they are the all solid heel guard or nets and heal guard ( nets and heal guards are the on in the picture) no other brand has the kicking room that the ac old school pro peg does. Pegs are a good size and I’ve never seen these break. I have seen pictures of the alba ones broken before. Not sure about kicking room on the factory 43 ones. UNI made nerfs that were pretty silimar to the ac with kicking room. Glad I got my ac sets when I did. On my ac nerfs I run a long bolt through the top front motor mount and they just slide on that and use a nut and lock washer. I’ve seen a lot of people run a normal motor mount bolt then another going in which is stupid imo. I believe the bolt was 65mm long if I remember correctly Sent from my iPhone using Tapatalk Quote
Keno Posted May 1, 2018 Report Posted May 1, 2018 There must be some variation in the Alba ones, my kicker has only gotten stuck a couple times. Once you get used to kicking with your heel, it is no problem. Quote
Buckeye513 Posted May 1, 2018 Report Posted May 1, 2018 IMO the old school ac propegs are still the best ones to date wether they are the all solid heel guard or nets and heal guard ( nets and heal guards are the on in the picture) no other brand has the kicking room that the ac old school pro peg does. Pegs are a good size and I’ve never seen these break. I have seen pictures of the alba ones broken before. Not sure about kicking room on the factory 43 ones. UNI made nerfs that were pretty silimar to the ac with kicking room. Glad I got my ac sets when I did. On my ac nerfs I run a long bolt through the top front motor mount and they just slide on that and use a nut and lock washer. I’ve seen a lot of people run a normal motor mount bolt then another going in which is stupid imo. I believe the bolt was 65mm long if I remember correctly Sent from my iPhone using TapatalkAgree on the ones with nets being good. Mine with plates back and bottom I can’t stand in muddy conditions. My pegs may as well be mud platforms.Sent from my iPhone using Tapatalk Quote
trickedcarbine Posted May 6, 2018 Report Posted May 6, 2018 On April 30, 2018 at 7:45 PM, bluebanshee98 said: IMO the old school ac propegs are still the best ones to date wether they are the all solid heel guard or nets and heal guard ( nets and heal guards are the on in the picture) no other brand has the kicking room that the ac old school pro peg does. Pegs are a good size and I’ve never seen these break. I have seen pictures of the alba ones broken before. Not sure about kicking room on the factory 43 ones. UNI made nerfs that were pretty silimar to the ac with kicking room. Glad I got my ac sets when I did. On my ac nerfs I run a long bolt through the top front motor mount and they just slide on that and use a nut and lock washer. I’ve seen a lot of people run a normal motor mount bolt then another going in which is stupid imo. I believe the bolt was 65mm long if I remember correctly Sent from my iPhone using Tapatalk Those are all I'll run on my ice bikes. There was a sketchy incident running 20" studded tires on a -2 swing arm that destroyed my boot and left my ankle pretty sore. From then on, it's gotta have a solid plate back there for me. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.