30years Posted June 14, 2017 Report Posted June 14, 2017 I'd really like to see the motor go first before I start tearing apart the rest of the bike. stock titled frame nothing cut or modified, 10 mill cub on alky, full drag port by K&T, TZ and max load bearings, WCR extreme duneable override 2 thru 5, lock up, fast racing fibers and plates, chariot head w/ removable domes, still has off the shelf 23cc domes, full polished packard lectrons 40mm bored to 41.5w/dual power jets, v'3's, small bore shearers, dual pingle,dynatek coil This motor has very little time on it after sending cylinders to millennium technologies to be honed and re nikasiled. +12 swingarm, JJ&A play axle, 14 paddle staggered extremes on drag cuts, 76 RO, marvin shaw fronts Looking for $3400 for complete motor without pipes or carbs, if that goes, I would list prices on everything else. thank you Quote
Soli Posted June 14, 2017 Report Posted June 14, 2017 I'd really like to see the motor go first before I start tearing apart the rest of the bike. stock titled frame nothing cut or modified, 10 mill cub on alky, full drag port by K&T, TZ and max load bearings, WCR extreme duneable override 2 thru 5, lock up, fast racing fibers and plates, chariot head w/ removable domes, still has off the shelf 23cc domes, full polished packard lectrons 40mm bored to 41.5w/dual power jets, v'3's, small bore shearers, dual pingle,dynatek coil This motor has very little time on it after sending cylinders to millennium technologies to be honed and re nikasiled. +12 swingarm, JJ&A play axle, 14 paddle staggered extremes on drag cuts, 76 RO, marvin shaw fronts Looking for $3400 for complete motor without pipes or carbs, if that goes, I would list prices on everything else. thank youHow much for the overrideSent from my iPhone using Tapatalk Quote
30years Posted June 14, 2017 Author Report Posted June 14, 2017 I'd really like to see the motor go as a whole, minus the intakes carbs and pipes. Quote
n2otoofast4u Posted June 14, 2017 Report Posted June 14, 2017 Location?Sent from my SAMSUNG-SM-G891A using Tapatalk Quote
30years Posted June 14, 2017 Author Report Posted June 14, 2017 Port Huron MISent from my iPhone using Tapatalk Quote
justin_smallwood Posted June 15, 2017 Report Posted June 15, 2017 I want first dibs on pipes if the price is right. Quote
Chukkinsod Posted June 15, 2017 Report Posted June 15, 2017 In PH myself ....never seen this bike at the track. Shoot me a PM on rear tire price/ roll out / paddles...look like 14 extreems.... HP not cock blocking...u got 1st dibs Quote
30years Posted June 15, 2017 Author Report Posted June 15, 2017 I haven't run at all this summer, or at all last summer. I have videos of me at the motorcycle club from the summer before that. Which is only a total of about 8 or 10 passes on this fresh motor. Quote
Zillaman Posted June 16, 2017 Report Posted June 16, 2017 I would be interested in the lockup and cover if you decide to part it out. Zilla Out Quote
30years Posted June 18, 2017 Author Report Posted June 18, 2017 Dropping the asking price for the motor to $3200. Willing to accept offers if you'd want intakes and carbs and even pipes to go with the motor sale. Quote
Banshee73 Posted June 25, 2017 Report Posted June 25, 2017 Still got the Lectron 40mm for saleSent from my SM-G900P using Tapatalk Quote
hazacookie Posted June 28, 2017 Report Posted June 28, 2017 I would like to have that jj&a axle if you decide to part out..Sent from my SM-G900V using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.