Jump to content

Springs in gearbox?


Recommended Posts

So went to do what I thought was an easy repair on my chain sprocket as it had come off the drive shaft. Went to top up some fluids, gearbox was low, topped up discovered a leak on the gasket, fair enough took off the cover and now the trouble starts.

 

Inside the clutch housing there were pieces of the plastic gear that drives my Impeller (I can fix this) but also what appeared to be shards of tiny springs. The springs are about 1/10th the size of the ones holding the clutch plates and really delicate looking so seem strange to me to be in the gearbox. Any ideas where they have come? or anyone know of any other springs in the gearbox asdie from the clutch ones which were all fine, trying to decide where/how far I need to go ripping. 

 

I think could be major gearbox fail as this would indicate what broke the water impeller and driveshaft sprocket at same time, there was no bang but it stopped at high speed, just coasted to a stop like the chain snapped but saw it was the sprocket, any help be much appreciated, first time poster long term lurker.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...