Ayesully810 Posted May 10, 2017 Report Share Posted May 10, 2017 I know! But are the 916's better than Pro Circuits? I have FMF Fatty's, Pro Circuits and T5's I can sell to buy a new set of pipes. Are there any differences between the Alien vs 916's other than the obvious? I'm not sure how I feel about the center exit exhaust. 916s are the most badass looking pipe ive seen and they look sick I would like to ride a set one day Quote Link to comment Share on other sites More sharing options...
SandSlingerOR Posted May 11, 2017 Report Share Posted May 11, 2017 One of these days Id like to go to cam's and dyno a set of pc,dmc,fmfs and see if itd be worth switching pipes on my small motor. Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted May 11, 2017 Report Share Posted May 11, 2017 916, are imho, the best sounding pipe. Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted May 11, 2017 Report Share Posted May 11, 2017 Im willing to bet DMCBANSHEE helped popularize those pipes with his badass riding vids 1 Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted May 12, 2017 Report Share Posted May 12, 2017 Shit, they removed the fb thread drama about the chain guard Quote Link to comment Share on other sites More sharing options...
gusto Posted May 19, 2017 Report Share Posted May 19, 2017 How does she run? Quote Link to comment Share on other sites More sharing options...
Strm Trpr Posted May 19, 2017 Author Report Share Posted May 19, 2017 Well, I gave it a slow primer kick and then gave it a good kick and it fired right up and purred. I let her warm up, sync'd the carbs and set the idle to ~1,550rpm. 48 pilots JJH needles middle clip 155 main Air screws are 3/4 turns out in 90* weather. I ride in 60-80* weather, so I'm going to put 50's in. Runs great, pulls clean throughout the power band. It's blowin the stock tires off on the country road. I can't wait to get her to the sand and let this 21x12x8 8 paddle extremes really get the traction down. I'm letting her cool down then I'm gonna check the torque on reeds, head and cylinders. I have a little clutch drag, but I think I dial that in at the perch. I'll have more later tonight. 2 Quote Link to comment Share on other sites More sharing options...
Strm Trpr Posted May 20, 2017 Author Report Share Posted May 20, 2017 50 pilot was the ticket! Woke the bottom end to mid range up! Air screws are at 2.5 turns out, but I'm anticipating turning them in once I get to Pismo in the cool dense ocean air. Had to retune idle and sync. Dialed in part throttle sync now and it flat out rips. Pulls through the power band strong and smooth. Tomorrow morning in the cool air I'm gonna verify the tune and plug chop the mains. Right now the mains are 155's and the JJH needles are on the middle clip. 1 Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted May 20, 2017 Report Share Posted May 20, 2017 U r the tuning master Sent from my LGMS210 using Tapatalk Quote Link to comment Share on other sites More sharing options...
gusto Posted May 20, 2017 Report Share Posted May 20, 2017 Nice! Quote Link to comment Share on other sites More sharing options...
Strm Trpr Posted May 20, 2017 Author Report Share Posted May 20, 2017 U r the tuning master Sent from my LGMS210 using Tapatalk I don't know about that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.