n2otoofast4u Posted April 23, 2017 Report Share Posted April 23, 2017 My turbo bike had a spacer in it at one point. It chewed up boost and nitrous just fine. Sent from my SAMSUNG-SM-G891A using Tapatalk Quote Link to comment Share on other sites More sharing options...
845bansheeSantos Posted April 23, 2017 Author Report Share Posted April 23, 2017 thanks everyone. i definitely agree with the "drive it like i stole it" mentality. Especially since she runs fantastic. I'm just planning ahead for the winter tear down. It's fine this season, but i don't want to leave that plate when i redo it. Coolhead with stroker domes, and port it. Check!! I may even bump her up to a 421 while she's apart. Thanks again for all the info. 1 Quote Link to comment Share on other sites More sharing options...
845bansheeSantos Posted April 24, 2017 Author Report Share Posted April 24, 2017 On another note, the guy i got it from did some other things that dont make much sense to me. The pistons are 66.5, the cylinders are polished (on the outside atleast) and the trans gears were replaced. He gave me the original one. Im curious why he did the plate at all.. Seems silly after having other things done at a shop. Maybe just a budget build. It does run good though, so i wont play with her until i have to. Thanks again. Quote Link to comment Share on other sites More sharing options...
guns4children Posted April 24, 2017 Report Share Posted April 24, 2017 My turbo bike had a spacer in it at one point. It chewed up boost and nitrous just fine. Sent from my SAMSUNG-SM-G891A using Tapatalk Any vids? Quote Link to comment Share on other sites More sharing options...
guns4children Posted April 24, 2017 Report Share Posted April 24, 2017 On another note, the guy i got it from did some other things that dont make much sense to me. The pistons are 66.5, the cylinders are polished (on the outside atleast) and the trans gears were replaced. He gave me the original one. Im curious why he did the plate at all.. Seems silly after having other things done at a shop. Maybe just a budget build. It does run good though, so i wont play with her until i have to. Thanks again. I believe the spacer plate is for when you want to run a stroker crank but don't want to have it ported. Quote Link to comment Share on other sites More sharing options...
845bansheeSantos Posted April 24, 2017 Author Report Share Posted April 24, 2017 Only vids of me riding. Ill do a walk around video later today. Quote Link to comment Share on other sites More sharing options...
guns4children Posted April 24, 2017 Report Share Posted April 24, 2017 Only vids of me riding. Ill do a walk around video later today. I was asking mr. Green if he had any vids of his turbo bike. Quote Link to comment Share on other sites More sharing options...
J-Madd Posted April 24, 2017 Report Share Posted April 24, 2017 I was asking mr. Green if he had any vids of his turbo bike.He'll have to pull out the VHS home videos to show the turbo bike. Sent from my STV100-1 using Tapatalk Quote Link to comment Share on other sites More sharing options...
JUSTWANNARACE Posted April 24, 2017 Report Share Posted April 24, 2017 He'll have to pull out the VHS home videos to show the turbo bike. Sent from my STV100-1 using Tapatalk LMAO Quote Link to comment Share on other sites More sharing options...
shanYE west Posted April 25, 2017 Report Share Posted April 25, 2017 He'll have to pull out the VHS home videos to show the turbo bike. Sent from my STV100-1 using Tapatalk Last I heard he was still transferring them from the reels... I've been gone awhile.. maybe he got them done. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.