Mobile 1mechanic Posted February 16, 2017 Report Share Posted February 16, 2017 Proud first time banshee owner my build is coming along very well but I need help with the size jets I should start with my build consist of 4mill crank dune ported stock cylinders 19cc domes vitos cool head pro circuit platinum pipes pwk 33 carbs plus 4 timing all advice would be appreciated Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted February 16, 2017 Report Share Posted February 16, 2017 What type of fuel you planning to run. Just out of curiosity. Sent from my SM-S820L using Tapatalk Quote Link to comment Share on other sites More sharing options...
Mobile 1mechanic Posted February 16, 2017 Author Report Share Posted February 16, 2017 I'm planning on running 93/110 mixed Quote Link to comment Share on other sites More sharing options...
Mobile 1mechanic Posted February 16, 2017 Author Report Share Posted February 16, 2017 Forgot to mention I have pyramid reed valves Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted February 17, 2017 Report Share Posted February 17, 2017 You will need straight 110 with those domes pretty close to 14:1. I would start 165 main 50 pilot , dek needle middle slot . . These settings will be good to heat cycle and test ride in order to plug chop . Depending on porting you might end up with a cel needle but my portwork loves the dek. If your a newb make sure you pressure test your engine after assembling, then check compression, squish. Also ohm out all electronics Quote Link to comment Share on other sites More sharing options...
Mobile 1mechanic Posted February 17, 2017 Author Report Share Posted February 17, 2017 OK thanks man I will gonna start building engine tomorrow Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.