Craig B Posted March 6, 2017 Report Share Posted March 6, 2017 How much power could a 10 Mil DM 78x64 make on alcohol? Quote Link to comment Share on other sites More sharing options...
rjdgriff Posted March 6, 2017 Report Share Posted March 6, 2017 How much power could a 10 Mil DM 78x64 make on alcohol? around 125hp Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
registered user Posted March 6, 2017 Report Share Posted March 6, 2017 With a 102 spread there is limited space there. ya i know. theres barely enough room for 64mm pistons if u want a sliver of hope for passage geometry that isnt severly compromised Quote Link to comment Share on other sites More sharing options...
rjdgriff Posted March 6, 2017 Report Share Posted March 6, 2017 How much power could a 10 Mil DM 78x64 make on alcohol? I meant 225HP!!! Damn it phone! Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
JTmachining Posted March 6, 2017 Report Share Posted March 6, 2017 Powers Quote Link to comment Share on other sites More sharing options...
registered user Posted March 6, 2017 Report Share Posted March 6, 2017 225 sounds like alot. 745cc in dyno section is only 170 or so. did u sneeky buggers find some new technology haha Quote Link to comment Share on other sites More sharing options...
special06shee Posted March 6, 2017 Report Share Posted March 6, 2017 How much power could a 10 Mil DM 78x64 make on alcohol?145-150 1 Quote Link to comment Share on other sites More sharing options...
Craig B Posted March 6, 2017 Report Share Posted March 6, 2017 I meant 225HP!!! Damn it phone! Sent from my iPhone using Tapatalk Really? I was thinking around 150 Quote Link to comment Share on other sites More sharing options...
rjdgriff Posted March 6, 2017 Report Share Posted March 6, 2017 Really? I was thinking around 150 in all reality yes. 140-150 lol Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
RagunCajun Posted March 6, 2017 Report Share Posted March 6, 2017 With a 102 spread there is limited space there. Those are a 78 bore. Now think about a DMX that is 80 83 or even 85 bore. Now you will analyze this to death, but the 85 bore DMX's have proven to be superior in performance than its 120 spread Cougar cyld big brother. off topic, I sure wish there was a single post or spread sheet to list all aftermarket cylinders, bores, spreads, sizes, whats requires in general to run them etc. Id make one if people pm'ed me the info. 1 Quote Link to comment Share on other sites More sharing options...
rjdgriff Posted March 6, 2017 Report Share Posted March 6, 2017 off topic, I sure wish there was a single post or spread sheet to list all aftermarket cylinders, bores, spreads, sizes, whats requires in general to run them etc. Id make one if people pm'ed me the info.get it done mang!!! Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
JTmachining Posted March 6, 2017 Report Share Posted March 6, 2017 off topic, I sure wish there was a single post or spread sheet to list all aftermarket cylinders, bores, spreads, sizes, whats requires in general to run them etc. Id make one if people pm'ed me the info.TSS Quote Link to comment Share on other sites More sharing options...
RagunCajun Posted March 6, 2017 Report Share Posted March 6, 2017 Sent from my iPhone using Tapatalk People need to pm me info man, i understand cub, serval cub, and super forms of each. Then ill photoshop a big chart with each with info, explanations etc. If someone knows, ill gladly tell them what info i need. 1 Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 6, 2017 Report Share Posted March 6, 2017 no the inboard 6 trans look all sqaushed up more than the outer 6I know it's not DM talk, but Larry at DFE whipped my Cheetah on a flow bench just to baseline a couple things, and you'd be surprised at how close the folks at CP actually got those oblong transfers inside to flow to the outside. Sort of similar casting. Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted March 6, 2017 Report Share Posted March 6, 2017 ya i know. theres barely enough room for 64mm pistons if u want a sliver of hope for passage geometry that isnt severly compromisedBut what is being comprised? HP? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.