Dennis Posted February 2, 2017 Report Share Posted February 2, 2017 Recently picked up a 01.opened her up has a hot rods 4 mil stroker crank. Wiseco 795 pistons stock head stock bore. Pistons are hitting the head. Guy had stock head gasket no spacers no milling. So basically I need pistons and a head now can anyone tell me the correct way to build this. Looking to purchase a pro design head 21cc domes wiseco 795's again and cometic 2mil stroker head gasket Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted February 2, 2017 Report Share Posted February 2, 2017 Port for the extra stroke, and have 4mil domes cut. Sent from my SM-S820L using Tapatalk Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted February 2, 2017 Report Share Posted February 2, 2017 Go with a Noss head, or driveline set up. No changing studs. Sent from my SM-S820L using Tapatalk Quote Link to comment Share on other sites More sharing options...
Dennis Posted February 2, 2017 Author Report Share Posted February 2, 2017 Im new to the 4 mil builds. Hot rods website calls for 2mm head gasket for clearance. What Do you think about this. I was thinking of using the gasket and the 21cc domes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.