JasonB Posted December 14, 2016 Report Share Posted December 14, 2016 Motors apart for port and pro-mod, for fun I popped the impeller out and there's some light marks on the shaft, is this thing trash? I have new seals/bushings coming already. I can feel the marks with my finger nail but it's not indented seriously, do I need to replace this? And wtf is all this marking on the inside of the water pump cover? It looks like someone took a Grindr to it. The impeller has no evidence of contact with the water pump cover so I'm confused why it looks that way. Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted December 14, 2016 Report Share Posted December 14, 2016 Well, if it didn't leak before, it will with a new seal. I'd replace that impeller. As far as the cover, the sealing surface looks OK, maybe the last guy had a rat clean off the old gasket. Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted December 14, 2016 Report Share Posted December 14, 2016 You can see the groove in the shaft, I'd replace it. As for the cover, I can't tell if that is corrosion from some brackish water, or leftover remnants of someone's attempt to remove a gasket with a 20 grit wheel. Regardless, I'd replace it as well. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted December 14, 2016 Report Share Posted December 14, 2016 Lay that cover on a piece of granite or heavy glass with 600 grit. Run it in figure 8 pattern and then finish it with 800 grit. It'll be fine. Quote Link to comment Share on other sites More sharing options...
JasonB Posted December 14, 2016 Author Report Share Posted December 14, 2016 (edited) which brand do i need to go with here for the impeller, i thought i'd seen people post about certain ones that arent good quality and cause problems. Also looking at the quick drain pump covers too, theres a few on ebay for as low as $14 shipped. I may just take your advice trickedcarbine and smooth this cover down myself to save a few bucks. Im about to search around for info on the chariot ultra high flow pumps to see if those are worthwhile. Im all for better cooling mods but im not some crazy high hp bike and their ad even states it probably wont show lower temps in the cooling system just help reduce hot spots etc. Edited December 14, 2016 by JasonB Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted December 14, 2016 Report Share Posted December 14, 2016 I believe mull has the better impeller design . Sent from my SM-S820L using Tapatalk Quote Link to comment Share on other sites More sharing options...
broke350 Posted December 14, 2016 Report Share Posted December 14, 2016 I've run the mull impeller and aluminum drive gear on both my banshees. I'd recommend them. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted December 14, 2016 Report Share Posted December 14, 2016 Anything but Mod Quad Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted December 14, 2016 Report Share Posted December 14, 2016 Anything but Mod Quad^ this Quote Link to comment Share on other sites More sharing options...
JasonB Posted December 14, 2016 Author Report Share Posted December 14, 2016 i've already got an aluminum drive gear, i just really need the impeller at this point. a quick drain pump cover would be nice but i will smooth this one out. i never had leaking issues with it so the sealing surface never gave me trouble, its just all jacked up looking so i dont know what did it or why. so just no mod quad. Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted December 15, 2016 Report Share Posted December 15, 2016 I run oem. I know alot of ppl dont, and wont. A member that hasn't been on in awhile once said he only uses oem, and asked how many aftermarket water pump/ impellers have lasted 20 yrs, or better. Seemed plausible to me........whatever happened to Sprinklerman? Sent from my SM-S820L using Tapatalk Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted December 15, 2016 Report Share Posted December 15, 2016 Running oem Quote Link to comment Share on other sites More sharing options...
Shee_fast Posted December 15, 2016 Report Share Posted December 15, 2016 (edited) I have a few oem impellers snd a ez drain water pump cover ill sell if you need em Sent from my SM-G930P using Tapatalk Edited December 15, 2016 by Shee_fast Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.