Jump to content

97 banshee not starting up


Telonbros101

Recommended Posts

those readings were just for the stator right off the plug like the video showed. the 3rd reading from the red wire to the white wire I was suppose to get 20 ohms and I didn't get no reads there. so does that mean my stator is bad?

 

Do you mean red to green wire on the stator plug for testing the ignition coil?

Link to comment
Share on other sites

  • Replies 34
  • Created
  • Last Reply

Top Posters In This Topic

yeah but my stator has different colors then what the video shows, mine has red and white and white and brown, for light 2 yellow and one black. from white to brown I got 98 ohms and from red to white I got 0 ohms  and yellow and black I got .4 ohms.

Link to comment
Share on other sites

Well, if that's the case, then it would seem your ignition coil within the stator is shot and you need a new stator.  Maybe someone else with more knowledge will chime in, but that would make sense why you have no spark.  I'm not sure if the different colors mean it's an aftermarket stator, but most everything I've read on here says buy OEM only as the aftermarket stators can sometimes be junk right out of the box.

Edited by broke350
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...