JasonB Posted November 14, 2016 Report Share Posted November 14, 2016 I just swapped out the Heavy Duty (tusk brand i think?) clutch springs that came with my bike last year because the clutch pull is retarded. I dont think i have enough power to really need some serious clutch pressure like they provide. I put a new set of Yamaha clutch springs in and now my clutch pull is super easy, it was almost unenjoyable to ride the bike before after the first 30 minutes into a ride. My questions; will i end up having issues with the clutch slipping now? Should i throw three of the HD springs back in there for good measure? I have the pancake bearing adjusted just fine, engagement isnt an issue. I just wont be able to test it until saturday when i ride next and theres no way in hell im wrenching when im supposed to be riding Bikes mods: non-ported cylinder fresh rings and rehoned vforce reeds timing plate cool head and 22cc domes welded crank and fresh bearings/seals throughout SLP pipes air box mod i think these are any relevant 'power' mods worth mentioning Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted November 14, 2016 Report Share Posted November 14, 2016 You'll be fine. Oem Springs give out at like 60hp 1 Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted November 14, 2016 Report Share Posted November 14, 2016 Keeping it? Sent from my SM-S820L using Tapatalk Quote Link to comment Share on other sites More sharing options...
STRIBZ Posted November 15, 2016 Report Share Posted November 15, 2016 you should be fine with stock springs. but i always ran all 6 hd springs.. the pull never bothers me. You running stock lever/perch? 1 Quote Link to comment Share on other sites More sharing options...
JasonB Posted November 15, 2016 Author Report Share Posted November 15, 2016 Keeping it? Sent from my SM-S820L using Tapatalk Yep. Work picked up so I could afford to hang onto it. Pretty thankful I still have it, just hard not to build a 4 mill now lol 1 Quote Link to comment Share on other sites More sharing options...
JasonB Posted November 15, 2016 Author Report Share Posted November 15, 2016 you should be fine with stock springs. but i always ran all 6 hd springs.. the pull never bothers me. You running stock lever/perch? I have ASV shorty levers. Fuckers are nice but with these HD springs not real fun to ride. Don't get me wrong I made them work just fine with the HD springs at Glamis for a week in Spring, just not real enjoyable since the bike really doesn't make enough power to merit HD springs or a lockup. Yet. Quote Link to comment Share on other sites More sharing options...
STRIBZ Posted November 15, 2016 Report Share Posted November 15, 2016 id say just do 3hd and 3 oem just to be sure you don't get slippage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.