239banshee Posted December 5, 2003 Report Share Posted December 5, 2003 i took the pump cover off and see the impeller,does it just slide out or is there something else thanks Quote Link to comment Share on other sites More sharing options...
Lanky Posted December 5, 2003 Report Share Posted December 5, 2003 you should invest into a clymers manual Quote Link to comment Share on other sites More sharing options...
239banshee Posted December 5, 2003 Author Report Share Posted December 5, 2003 its on its way,but that doesnt help me now Quote Link to comment Share on other sites More sharing options...
bronco91shee Posted December 5, 2003 Report Share Posted December 5, 2003 i think u have t pull off the whole side case. On the bac side is a c-clip. Im not sure, but i think thats what it was last time i had mine apart. By the way, how much does a new impeller cost? Peace out. Quote Link to comment Share on other sites More sharing options...
raxen Posted December 5, 2003 Report Share Posted December 5, 2003 The new impeller is about 30 on Ebay. You will need to remove the circlip on the inner side before it will come out. Also, if my memory is working correctly, there is a small bearing and seal that you should replace while you are in there. Do it right the first time. Quote Link to comment Share on other sites More sharing options...
239banshee Posted December 5, 2003 Author Report Share Posted December 5, 2003 to get to that clip that whole side cover has to be removed Quote Link to comment Share on other sites More sharing options...
flea49 Posted December 5, 2003 Report Share Posted December 5, 2003 If you ride hard,invest a few more dollars,and get a billet impeller. Quote Link to comment Share on other sites More sharing options...
Lanky Posted December 5, 2003 Report Share Posted December 5, 2003 www.bluetraxx.com go there and look in the tech tips. There are step by step instructions on how to remove it Quote Link to comment Share on other sites More sharing options...
SCOTT PRESSLEY Posted December 6, 2003 Report Share Posted December 6, 2003 You can go to atv home page click on parts catolog it will show you a cut sheet on everything you want to know about how it goes together . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.