Jump to content

Is this thing fixable?


Banshee SE

Recommended Posts

I have a set of cylinders that apparently somebody was practicing how to port and get screw one of them. Both cylinders were in good and clean until whoever did this mess touch them. Actual bore 63.84mm. What you guy thing do they worth something? I put a tie wrap to show the wrong thing with the cylinder, there a hole inside out that clearly the cylinder will have a compression leak. Any shop that could fix it, does it really worth the job? Is it an expensive job? Please any help will be appreciate it.

TIA.

 

6c392600b3e117e6d945e1f7172a3ed5.jpg

 

0c0a135bccd11e620f7129a253cf7fc4.jpg

 

a4f7b7626b0cab35f88b07fd5809ed17.jpg

 

0e7081e8663b993acb754287d556c434.jpg

 

63d01ea08f8e30b818bc4724b932b0bc.jpg

 

195d6edbbe9a1e120411b2cce387a712.jpg

 

b16bafe4a4bb7c594a567a50e2b3ec04.jpg

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

your not mechanically inclined I take it. clean the area alittle with a dremel if you have one. if not no big deal. put piece of tape on back side of hole, mix alittle jb weld with screw driver or something and fill up the hole, done. local machine shop would probly weld it free if they already have their tig machined fired up

Link to comment
Share on other sites

that could be welded easy. do it quick and dont pour a ton of heat to it any longer than necesarry or the casting pulls away from the sleeve and you risk warping the thin area of the gasket surface. between 5-10sec and it be good to go

Welded "easy"..... noted

 

So you're first hand, glove to torch, torch to material, experienced in welding this "easy" spot?

 

"Easy" must have a different meaning in Illinois? IPS.......For all you're welding needs! UN-FUCKING REAL!...

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...