Rebelfromva Posted August 19, 2016 Report Share Posted August 19, 2016 Recently purchased a banshee that needs a complete motor rebuild. Guy ran without oil and one piston ended up pretty bad. Everything looks completely stock other than some drop in weisco rods and Pistons. Going to measure the cylinders tonight to make sure they can be bored out if they are not indeed stock. My question for you guys is who are the go to guys for crank and cylinder work? It's not something that needs to be done tomorrow so to speak so I do not mind waiting some on grade A work. Thanks guys! Quote Link to comment Share on other sites More sharing options...
Rebelfromva Posted August 19, 2016 Author Report Share Posted August 19, 2016 Cylinders are indeed stock bore Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted August 19, 2016 Report Share Posted August 19, 2016 Check out site sponsors. Where are you from? A few members do builds as well. Sent from my SM-S820L using Tapatalk Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted August 19, 2016 Report Share Posted August 19, 2016 If you are from Virginia, surfrjag is close and builds a mean motor Quote Link to comment Share on other sites More sharing options...
Rebelfromva Posted August 19, 2016 Author Report Share Posted August 19, 2016 I am from Virginia. Just so happen to work with the guy that set the banshee Guinness record too! I'm not against having someone build the motor but really wanted to build it myself with the exception of certain work i.e. Porting boring Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted August 20, 2016 Report Share Posted August 20, 2016 If your speaking of building as in assembling, then by all means yes....go for it. Pm surfrjag for porting, and other. Sent from my SM-S820L using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Rebelfromva Posted August 20, 2016 Author Report Share Posted August 20, 2016 I sent him a message. Any recommendations as far as builds starting from completely stock? No racing or drag. Trail riding but I'm willing to build the best bang for my buck. Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted August 20, 2016 Report Share Posted August 20, 2016 Discuss your needs with whomever you choose to do the work. What mods do you have now? Sent from my SM-S820L using Tapatalk Quote Link to comment Share on other sites More sharing options...
Rebelfromva Posted August 20, 2016 Author Report Share Posted August 20, 2016 Bike is stock. Doing a complete build/rebuild Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted August 20, 2016 Report Share Posted August 20, 2016 Time to put a budget together. Sent from my SM-S820L using Tapatalk Quote Link to comment Share on other sites More sharing options...
Rebelfromva Posted August 23, 2016 Author Report Share Posted August 23, 2016 Thinking I am going to grab a 4 mill crank. Guy that had the bike before me let water get down in the case. Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted August 23, 2016 Report Share Posted August 23, 2016 I am from Virginia. Just so happen to work with the guy that set the banshee Guinness record too! I'm not against having someone build the motor but really wanted to build it myself with the exception of certain work i.e. Porting boring HOLLY SHIT!! A WORLD RECORD?? FOR WHAT? Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted August 23, 2016 Report Share Posted August 23, 2016 I am from Virginia. Just so happen to work with the guy that set the banshee Guinness record too! I'm not against having someone build the motor but really wanted to build it myself with the exception of certain work i.e. Porting boringWhat shop? Quote Link to comment Share on other sites More sharing options...
J-Madd Posted August 23, 2016 Report Share Posted August 23, 2016 Surely it's GRR.... Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted August 23, 2016 Report Share Posted August 23, 2016 Isn't currie in that area? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.