gregckrt1 Posted July 18, 2016 Report Share Posted July 18, 2016 I'm running full fmf gold series sst. At 659 elevation 300 main jet 25 pilot jet 32:1 mix Stock mikunki carbs Stock pistons. Do you think if I run 42:1 mixture it will be better or even adjust the air/mix screw? I don't know how to tell what position the needle is at so that could be it to. But when I was ripping it seems to be getting gas well, no bogging. I was also going to 27.5 but it starts fine and idles fine so idk if it would matter please help. Sent from my LG-H900 using Tapatalk Quote Link to comment Share on other sites More sharing options...
RIPPIN' IT UP Posted July 18, 2016 Report Share Posted July 18, 2016 Pic of second plug looks lean, very little color if any. Sent from my ZTE T84 using Tapatalk Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted July 18, 2016 Report Share Posted July 18, 2016 So it starts and idles, runs fine, and no bogging? What's the issue? 1 Quote Link to comment Share on other sites More sharing options...
gregckrt1 Posted July 18, 2016 Author Report Share Posted July 18, 2016 So it starts and idles, runs fine, and no bogging? What's the issue? Isnt it bad to run lean ? I thought u wanted a nice Tanisha brown plug Sent from my LG-H900 using Tapatalk Quote Link to comment Share on other sites More sharing options...
RIPPIN' IT UP Posted July 18, 2016 Report Share Posted July 18, 2016 Pic of the first plug looks good. Sent from my ZTE T84 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted July 18, 2016 Report Share Posted July 18, 2016 When was last time carbs were cleaned AND the floats set ? Were these plugs run like in doing a plug chop? Or were you just riding around?? Big difference !! Single air filter ?? Why would you want to use less oil ?? Quote Link to comment Share on other sites More sharing options...
gregckrt1 Posted July 18, 2016 Author Report Share Posted July 18, 2016 When was last time carbs were cleaned AND the floats set ? Were these plugs run like in doing a plug chop? Or were you just riding around?? Big difference !! Single air filter ?? Why would you want to use less oil ?? Carbs were cleaned over the weekend and I'll have to look up how to set the floats I have never done it. I mean I got to sixth pinned but I didn't shut it off right away I rode it home like a qrt. Mile after. And I do want to use more oil so I dot fry my pistons. Sorry newbie post lol Sent from my LG-H900 using Tapatalk Quote Link to comment Share on other sites More sharing options...
gregckrt1 Posted July 18, 2016 Author Report Share Posted July 18, 2016 Pic of the first plug looks good. Sent from my ZTE T84 using Tapatalk So maybe I just have to go over my carbs and make sure everything is the same ? Sent from my LG-H900 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.