arena314 Posted July 7, 2016 Report Share Posted July 7, 2016 ok so got the banshee done a few months back and been wondering what kind of of power shee's making now. my engine power mods are -dmc headers with fmf power core silencers. -uni foam filter with no lid -stock carbs with tors delete 290 mains and 30 pilot jets -65.45mm namura pistons (364cc) -stock jugs with a very clean bore and hone to match the pistons -mild trail port work (will show pics) -stock bottom. stock head the quad has about 2 hours on the new clutch water pump and top end. the quad runs great and sounds awsome. every time it hits that sweet power band the front tires come right up. the only regret I have is not using forged pistons but it should hold up. so what kind of crank and whp do you guys think I'm making I know it's hard to judge but give me an estimate. I'm thinking near 60 crank but idrk. Sent from my SM-G935T using Tapatalk Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted July 7, 2016 Report Share Posted July 7, 2016 Lol. Put it on a dyno. 39 1/2 hp. Sent from my SM-S820L using Tapatalk Quote Link to comment Share on other sites More sharing options...
arena314 Posted July 7, 2016 Author Report Share Posted July 7, 2016 it also has v force 4 reeds Sent from my SM-G935T using Tapatalk Quote Link to comment Share on other sites More sharing options...
dailydrifter Posted July 7, 2016 Report Share Posted July 7, 2016 Then it'll be 40.2 hp Quote Link to comment Share on other sites More sharing options...
arena314 Posted July 7, 2016 Author Report Share Posted July 7, 2016 I'd say it definitely has more then 40 horsepower Sent from my SM-G935T using Tapatalk Quote Link to comment Share on other sites More sharing options...
0sikshee Posted July 7, 2016 Report Share Posted July 7, 2016 I'd say it definitely has more then 40 horsepower Sent from my SM-G935T using Tapatalk you might be right...but not much more. Maybe mid 40s Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted July 7, 2016 Report Share Posted July 7, 2016 I'd say it definitely has more then 40 horsepower Sent from my SM-G935T using Tapatalk You may be surprised how far off you are, or close. Find somewhere to dyno it, and find out. Sent from my SM-S820L using Tapatalk Quote Link to comment Share on other sites More sharing options...
arena314 Posted July 7, 2016 Author Report Share Posted July 7, 2016 I'll say 1 thing it's much faster then it was when it had the stock porting and all. but the compression was very very low so that definitely didn't help lol Sent from my SM-G935T using Tapatalk Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted July 7, 2016 Report Share Posted July 7, 2016 Your no where near 60 with a stock head and stock timing. Sorry. The port work looks minimal. It doesn't look like the transfers have been touched. Quote Link to comment Share on other sites More sharing options...
arena314 Posted July 7, 2016 Author Report Share Posted July 7, 2016 how much power will advancing the timing net me? is it a noticeable difference? Sent from my SM-G935T using Tapatalk Quote Link to comment Share on other sites More sharing options...
Ayesully810 Posted July 8, 2016 Report Share Posted July 8, 2016 I'd say it definitely has more then 40 horsepower Sent from my SM-G935T using Tapatalk What state do you live in? Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted July 8, 2016 Report Share Posted July 8, 2016 how much power will advancing the timing net me? is it a noticeable difference? Sent from my SM-G935T using Tapatalk I believe it's a solid 3hp across the board Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted July 8, 2016 Report Share Posted July 8, 2016 One dollar Bob. Quote Link to comment Share on other sites More sharing options...
arena314 Posted July 8, 2016 Author Report Share Posted July 8, 2016 Pennsylvania. it's a low elevation area Sent from my SM-G935T using Tapatalk Quote Link to comment Share on other sites More sharing options...
hercalmighty Posted July 8, 2016 Report Share Posted July 8, 2016 Where at in PA Sent from my VS990 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.