2STROKIN_IT Posted July 1, 2016 Report Share Posted July 1, 2016 Hello fellas, Here's the issue in a nut shell, my nephew (18 year old) decided that his bike wasn't idling correctly so instead of wiaiting on me to come take care of it for him he decided he could take care of it himself, well the kid didn't tighten down the set screw on the idle screw and it backed out and it's missing in action now. Big problem is that we are loaded up and headed out to silver lake in a few hours and have no way of locating a new idle screw. Is there any way I can make a idle screw to replace missing one or can any one point me in the right direction with this. As always thanks a ton!!! Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted July 1, 2016 Report Share Posted July 1, 2016 call david allen racing at the dunes, they probably have it in stock. Quote Link to comment Share on other sites More sharing options...
2STROKIN_IT Posted July 1, 2016 Author Report Share Posted July 1, 2016 Yeah I was thinking the same thing cause I know they're right next door to parking lot for dunes but I wanna have a back up plan juuuust in case. Quote Link to comment Share on other sites More sharing options...
2STROKIN_IT Posted July 1, 2016 Author Report Share Posted July 1, 2016 So I called David Allan and no luck on this damn idle screw. Kinda sucks!! Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted July 1, 2016 Report Share Posted July 1, 2016 Go to home Depot and get a bolt and nut about the same length. All it does is prop the slide up a bit. File down the edges too a bit so they aren't sharp. It should last the weekend. Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted July 1, 2016 Report Share Posted July 1, 2016 problem is that 6mx.75 is a very uncommon thread, finding a metric bolt let alone a uncommon thread pitch is going to be difficult Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted July 1, 2016 Report Share Posted July 1, 2016 problem is that 6mx.75 is a very uncommon thread, finding a metric bolt let alone a uncommon thread pitch is going to be difficultHmm. Yeah I didn't know what size they were. Maybe a better hardware store, I have a few fastenal local to me. Maybe check to see if you gave a better store around Quote Link to comment Share on other sites More sharing options...
2STROKIN_IT Posted July 1, 2016 Author Report Share Posted July 1, 2016 I mean crap if anyone has any on hand I'll be glad to pay fees and what not to overnight it to David Allan or if it's on my way up from Chicago I can swing by and grab it!! In s bind now and I'd hate for this kid to have a bad time or not ride cause of that. Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted July 1, 2016 Report Share Posted July 1, 2016 (edited) Definitely a Presidential Solution, clean hole with brake cleaner and fill it with silicone. Kid will have to learn to idle it by jazzing the throttle. Edited July 1, 2016 by Larry's Shee 1 Quote Link to comment Share on other sites More sharing options...
Power_Man Posted July 1, 2016 Report Share Posted July 1, 2016 Definitely a Presidential Solution, clean hole with brake cleaner and fill it with silicone. Kid will have to learn to idle it by jazzing the throttle. Could he not "adjust" the idle with the cable on top of the carb? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.