Nbert1197 Posted May 16, 2016 Report Share Posted May 16, 2016 First off, I have Pro Circuit Platinum pipes, K&N air filter, removed airbox lid, stock carbs with TORS removed, 25 pilots, 270 mains. Over this winter, I did a full top and bottom end rebuild and also cleaned out the carbs. I put everything back together and it hasn't ran right since. From 0 to 1/8 throttle I have a bog that will kill the engine at idle. It also feels as though im only running on one cylinder occasionally when i get rolling, with the other cylinder kicking in after a few seconds. Im new to this and really bummed because I dont know where to start looking. Quote Link to comment Share on other sites More sharing options...
bigweav81 Posted May 16, 2016 Report Share Posted May 16, 2016 What's your compression? Try upping your pilot size. Sent from my SM-S820L using Tapatalk Quote Link to comment Share on other sites More sharing options...
mtsnieg Posted May 17, 2016 Report Share Posted May 17, 2016 Too small of a pilot jet. 27.5 minimum. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.