Dunatic619 Posted May 15, 2016 Report Share Posted May 15, 2016 Yes. Supposed to be good for another 1-2 ponies. 1 Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted May 15, 2016 Report Share Posted May 15, 2016 What does this accomplish...yes this a real question I've heard of it but what's the exact reason..same as porting cylinders? Sent from my VS810PP using Tapatalk It's not a huge gain, but it's easy. No reason to let a few ponies on the table. 1 Quote Link to comment Share on other sites More sharing options...
Shee_fast Posted May 16, 2016 Report Share Posted May 16, 2016 It's not a huge gain, but it's easy. No reason to let a few ponies on the table.Easy enough I can do it myself...just need to make sure the gasket lays close to Sent from my VS810PP using Tapatalk Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted May 16, 2016 Report Share Posted May 16, 2016 Easy enough I can do it myself...just need to make sure the gasket lays close to Sent from my VS810PP using Tapatalk Make sure the gasket matches the porting on the cylinders first. When you put it on the cases to match them use some dykem and mark where the gasket goes so you don't mess up the gasket. When you set it on there to mark them make sure the dowels are in place and it should be pretty close. Go slow. 2 Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted May 16, 2016 Author Report Share Posted May 16, 2016 Job finished! I smoothed everything together. 1 Quote Link to comment Share on other sites More sharing options...
Bennett131 Posted May 16, 2016 Report Share Posted May 16, 2016 Padawan Quote Link to comment Share on other sites More sharing options...
Shee_fast Posted May 17, 2016 Report Share Posted May 17, 2016 Job finished! I smoothed everything together. How far into the cases did,you go looks around a half to quarter inch..I'd really like to try this myself Sent from my VS810PP using Tapatalk Quote Link to comment Share on other sites More sharing options...
ClaudeMachining Posted May 17, 2016 Author Report Share Posted May 17, 2016 How far into the cases did,you go looks around a half to quarter inch..I'd really like to try this myself Sent from my VS810PP using Tapatalk I removed material in the vertical part. The rest is just matching the 2 surfaces Envoyé de mon GT-P5113 en utilisant Tapatalk Quote Link to comment Share on other sites More sharing options...
Shee_fast Posted May 17, 2016 Report Share Posted May 17, 2016 I removed material in the vertical part. The rest is just matching the 2 surfaces Envoyé de mon GT-P5113 en utilisant Tapatalk Right on I'm gonna do some more reading up on this cuz that looks easy enough...gonna practice on a wacked set of cases first tho lol Sent from my VS810PP using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.