Jump to content

2001 banshee NO SPARK, HELP NEEDED URGENT


Recommended Posts

I didn't hack up the harness, all the wiring was already pooched, melted, cut, lost extra wires that go nowhere etc, I followed diagrams that I know for a fact work best on the banshee So theirs no toes, throttle switches anything now, my wiring follows the schematic to a Tee, and I have no idea, prior owner had all the new parts I just installed them (by the way got the banshee for a killer deal) and all that's left to replace is the stator.. Sooo theoretically once I replace the stator EVERYTHINGS possible to replace that has to do with power on the bike will be replaced, so in theory it should have spark then, no? Everything except the stator has been replaced, I orderd an RMStator was this a good or bad choice? Should be here by early next week

Link to comment
Share on other sites

Works on big rigs, but doesn't have ohm meter, smh.

 

Might as well get a flywheel puller and Clymers Repair Manual ,you'll need them too.

 

Hope cdi you bought isn't a shitty Ricky or something.

Got to love the buy, then research approach.

That and shotgun parts replacement.

 

Have to ohm Stator and pickup coil, set pickup coil gap.

 

Where did you find the wire diagram you used ??

Suggest you double and triple check your work!

 

What kind of kill switch did you use ??

Link to comment
Share on other sites

I'm new to this site how do I post pics?? And all my wiring is done correctly, and I don't have an ohm meter cause Its lent out to a buddy atm

You can upload to any photo host like photo bucket and copy the image code and paste it here in your replies here. Or, down load tapatalk forum app on your phone/tablet and directly post photos from your device.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...