sharpie08 Posted April 18, 2016 Report Share Posted April 18, 2016 I recently rebuilt my bosses shee motor after he ran it on straight gas and blew a piston to hell! New head, cylinders, pistons, rods, stator, coil pack, and plugs. It is not getting a spark at all. Can somebody please help me figure this out im getting extremely irritated. Quote Link to comment Share on other sites More sharing options...
Dunatic619 Posted April 18, 2016 Report Share Posted April 18, 2016 (edited) Sounds like someone is getting FIRED! What've you done to know its not getting spark? Edited April 18, 2016 by Dunatic619 Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted April 19, 2016 Report Share Posted April 19, 2016 ^^THAT^^ and some new stators have been known to have the wires switched in the plug from where they should be. Quote Link to comment Share on other sites More sharing options...
sharpie08 Posted April 19, 2016 Author Report Share Posted April 19, 2016 Lol nah ive saved him to much money so far. Pulled plugs and tried to kick it over, also checked the boots with a volt meter. Im getting power out of the stator, just not to the coil pack. All wires are in tact. Quote Link to comment Share on other sites More sharing options...
sharpie08 Posted April 19, 2016 Author Report Share Posted April 19, 2016 Do you know where I can get a wiring diagram to double check the wires coming from the stator? Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted April 19, 2016 Report Share Posted April 19, 2016 Just make sure they match color for color on the harness. Quote Link to comment Share on other sites More sharing options...
sharpie08 Posted April 19, 2016 Author Report Share Posted April 19, 2016 Ok ill double check it all thank you. Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted April 19, 2016 Report Share Posted April 19, 2016 Is your red/black wire at the key switch grounded? Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted April 19, 2016 Report Share Posted April 19, 2016 http://bansheehq.com/forums/index.php?/topic/133650-banshee-electrical-faq/ Quote Link to comment Share on other sites More sharing options...
sharpie08 Posted April 19, 2016 Author Report Share Posted April 19, 2016 Im not sure, ill have to look. It was running fine until he seized the motor.it always started perfect. I left all wiring alone until I replaced the stator, thats why im getting irritated. Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted April 19, 2016 Report Share Posted April 19, 2016 What brand of stator? Quote Link to comment Share on other sites More sharing options...
sharpie08 Posted April 19, 2016 Author Report Share Posted April 19, 2016 Caltric Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted April 19, 2016 Report Share Posted April 19, 2016 Put the old one back on. Quote Link to comment Share on other sites More sharing options...
sharpie08 Posted April 19, 2016 Author Report Share Posted April 19, 2016 The old one has a gouge in a coil from someone at work dropping something on it while I was waiting on parts!! Thats the reason I had to order a new one. Are they junk? Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted April 19, 2016 Report Share Posted April 19, 2016 They don't have a good rep around here, but they are cheap. If it ran before and now don't, I'd look there first. (and that's with any electrical component from anywhere for anything, not OEM) But especially Banshee stuff Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.