B22 Posted April 9, 2016 Report Share Posted April 9, 2016 Hi guys, first time I've taken these carbs apart to thoroughly clean and inspect them and I'm a little confused. I believe there are supposed to be 2 floats, however I only have one inside one of the two. Is this normal or what? Ignore the shit inside it, that's why it's apart. Lol Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted April 9, 2016 Report Share Posted April 9, 2016 It's a drag thing. More room for fuel, less weight, maybe yours is missing. But regardless, ive seen ddrag guys do it. Quote Link to comment Share on other sites More sharing options...
tdod101 Posted April 9, 2016 Report Share Posted April 9, 2016 Weird Quote Link to comment Share on other sites More sharing options...
B22 Posted April 9, 2016 Author Report Share Posted April 9, 2016 Ok I'll check the other one and see if they're both like that. It caught me off guard, just wanted to ask you all. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
B22 Posted April 9, 2016 Author Report Share Posted April 9, 2016 So I'm not familiar but which side would it go on? It seems to be offset. It fits snug on one side and loosely on the other Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
B22 Posted April 9, 2016 Author Report Share Posted April 9, 2016 When I say snug I mean in relation to the gold piece (not sure on the name) Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
wayne_smith97 Posted April 9, 2016 Report Share Posted April 9, 2016 When I say snug I mean in relation to the gold piece (not sure on the name) It should be relatively loose against the float tang thing Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
B22 Posted April 9, 2016 Author Report Share Posted April 9, 2016 Okay Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
m671054 Posted April 9, 2016 Report Share Posted April 9, 2016 Make sure they dont hang up on the bowls. Usually there are clearance issue with billet bowls. Also the float pin goes furthest away from needle valve when running a pump. Those look like alky needle and seat 3.3 is for a pump. Quote Link to comment Share on other sites More sharing options...
J-Madd Posted April 9, 2016 Report Share Posted April 9, 2016 I would get the other float in there, especially if those are pumpers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.